Iek Brite сс10-1-0-брб 600вт, белый BR-D20-0600-K01 Инструкция к товару онлайн [2/12] 834505

– óñòàíîâèòü ëèöåâóþ ïàíåëü (2) è ðóêîÿòêó (1);

– ïîäàòü íàïðÿæåíèå ïèòàíèÿ.

Dimmer of BRITE series of the IEK trademark (hereinafter referred

to as the dimmer) is designed for turning on and off incandescent

Ïðèìåð ìîíòàæà äèììåðà ïðèâåäåí íà ðèñóíêå 4.

The dimmer meets the requirements of Directive LVD 2014/35/EU,

ÅÌÑ 2014/30/EU, RoHS 2011/65/EU+2015/863.

lamps, as well as regulating the brightness of their glow.

Install the dimmer only when the mains power supply is disconnected.

Be sure to check that there is no voltage at the work site using a voltage indicator.

– connect the electrical wires prepared for installation to the screw terminals

of the dimmer (4);

– fix the dimmer mechanism (4) in the mounting box;

Range of dimmer use: for flushed installation indoors. The dimmer is installed

in standard mounting boxes with diameter of 55 ё 60 mm, depth of 40 mm.

When fixing the dimmer in the mounting box, you must keep strict watch that

the wires do not fall under the spacer lugs. The screws for fastening the lugs

should be screwed in alternately and evenly.

Operation of the dimmer when cracks forming during operation or chips

in the base of the dimmer. To connect the dimmer to a faulty electrical

wiring. Connect defective lamps or lamps that are not designed to adjust

the brightness of their glow to the dimmer.

– remove the handle (1) and front panel (2);

– install the front panel (2) and the handle (1);

The delivery set of product consists of: dimmer – 1 pc., passport – 1 copies

(per multiple package).

FORBIDDEN

– install a decorative frame (purchased separately);

Install the dimmer in the following sequence:

An example of mounting a dimmer is shown in figure 4.

– apply power supply.

– for installation in a junction box (5) ensure minimum divergence of the

dimmer's spacer legs (4) by unscrewing the two screws securing the spacer legs.

Try not to disengage the screws from the nut;

– check the correctness of the wire connection according to the diagram

shown in figure 1 or 2;

– install the mechanism in the mounting box (purchased separately);

REAL ABILITY

BRITE