Home
Главная
Greenworks
Аккумуляторные
GD60BCB 60V, с АКБ 4 А*ч и ЗУ 2108407UB
Инструкция к GreenWorks GD60BCB 2108407 Страница: 8

Greenworks GD60BCB 60V, с АКБ 4 А*ч и ЗУ 2108407UB Инструкция к GreenWorks GD60BCB 2108407 онлайн [8/208] 835942

Greenworks GD60BCB 60V, с АКБ 4 А*ч и ЗУ 2108407UB Инструкция к GreenWorks GD60BCB 2108407 онлайн [8/208] 835942

7 TROUBLESHOOTING

Problem Possible Cause Solution

The ma-

chine does

not start

when you

push the

trigger.

No electrical con-

tact between the

machine and the

battery pack.

1. Remove battery pack.

2. Check contact and in-

stall the battery pack

again.

The battery pack is

depleted.

Charge the battery pack.

The lock-out but-

ton and trigger are

not pushed at the

same time.

1. Pull the lock-out but-

ton and hold it.

2. Pull the trigger to start

the machine.

The ma-

chine stops

when you

cut.

The guard is not

attached to the ma-

chine.

Remove the battery pack

and attach the guard to

the machine.

Heavy cutting line

is used.

Use only with the nylon

cutting line of 2.0

mm/2.4 mm diameter.

The grass winds

around the motor

shaft or the trim-

mer head.

1. Stop the machine.

2. Remove the battery

pack.

3. Remove the grass from

the motor shaft and trim-

mer head.

The motor is over-

loaded.

1. Remove the trimmer

head from the grass.

2. The motor will recover

to work as soon as the

load is removed.

3. When you cut, move

the trimmer head in and

out of the grass to be cut

and remove no more than

8" in pass.

The battery pack

or machine is too

hot.

1. Cool the battery pack

until its function returns

to normal.

2. Cool the machine for

approximately 10 mi-

nutes.

The battery pack is

disconnected from

the tool.

Install the battery pack

again.

The battery pack is

depleted.

Charge the battery pack.

Problem Possible Cause Solution

The line

does not ad-

vance.

Lines are welded

to themselves.

Lubricate with silicone

spray.

Not enough line

on spool.

Install more line.

Lines are worn too

short.

Advance the cutting line.

Lines are tangled

on spool.

1. Remove the lines from

the spool.

2. Wind the lines.

The line

keeps

breaking.

The machine is

used incorrectly.

1. Cut with the tip of the

line, avoid stones, walls

and other hard objects.

2. Advance the cutting

line regularly to keep full

cutting width.

The grass

winds

around the

trimmer

head and

motor hous-

ing.

Cut tall grass at

ground level.

1. Cut tall grass from the

top down.

2. Remove no more than

8" in each pass to prevent

wrapping.

The line

does not cut

well.

The cut-off blade

becomes dull.

Sharpen the cut-off blade

with a file or replace it.

Vibration

increases

obviously.

The line is worn

down at one side

and not advanced

in time.

Make sure that the line on

both sides is normal. Ad-

vance the line.

8 TECHNICAL DATA

Voltage 60 V

No load speed 6000 ±10%min

-1

(Grass trimmer),6500

±10%min

-1

(Brush cutter)

Cutting head Bump feed / Brush cutter blade

Cutting line diame-

ter

2.0 mm/2.4 mm

Cutting path diam-

eter

35.6 cm / 40.6 cmmm (Grass trimmer),

mm (Brush cutter)

Weight (without

battery pack)

3.85 kg

Battery model G60B2/G60B3/G60B4/G60B4 and

other BAC series

Charger model G60UC and other CAC series

8

English

EN

Похожие устройства