Home
Главная
Bosch
Несамоходные
ARM 3200 0.600.8A6.008
Инструкция к Bosch ARM 3200 06008A6008 Страница: 12

Bosch ARM 3200 0.600.8A6.008 Инструкция к Bosch ARM 3200 06008A6008 онлайн [12/181] 839464

Bosch ARM 3200 0.600.8A6.008 Инструкция к Bosch ARM 3200 06008A6008 онлайн [12/181] 839464

English | 11

Bosch Power Tools F 016 L81 177 | (24.9.14)

Never mow by pulling the mower to-

wards you.

Stop the blades if the machine has to

be tilted for transportation when

crossing surfaces other than grass

and when transporting the machine

to and from the area to be mowed.

Do not tilt the machine when starting

or switching on the motor, except if

the machine has to be tilted for start-

ing in long grass. In this case, do not

tilt it more than absolutely necessary

and tilt only the part which is away

from the operator. Always ensure

that both hands are in the operating

position before returning the ma-

chine to the ground.

Switch on the motor according to the

instructions with feet well away from

rotating parts.

Do not put hands or feet near or un-

der rotating parts.

Always stand clear of the discharge

zone when operating the machine.

Never pick up or carry the machine

while the motor is running.

Keep supply cables and extension

cables away from the blade. The

blade can cause damage to the cables

and lead to contact with live parts.

Beware electric shock hazard.

Do not modify this product. Unau-

thorized modifications may impair the

safety of your product and may result in

increased noise and vibration.

Regularly inspect the supply cable

and any extension cables. Do not con-

nect damaged cables to the supply or

touch a damaged cable before it is

disconnected from the supply. A

damaged cable can lead to contact

with live parts. Beware electric shock

hazard.

Remove the plug from the socket:

– Whenever you leave the machine.

– Before clearing a blockage,

– Before checking, cleaning or working

on the machine,

– After striking a foreign object. Inspect

the machine for damage and make re-

pairs as necessary,

– If the machine starts to vibrate abnor-

mally (check immediately).

Power supply

The voltage indicated on the rating

plate must correspond to the voltage

of the power source.

We recommend that this equipment

is only connected into a socket which

is protected by a circuit-breaker that

would be actuated by a 30 mA residu-

al current.

Only use or replace power supply ca-

bles for this unit which correspond to

the types indicated by the manufac-

turer. See the operating instructions

for the order no. and types.

Never touch the mains plug with wet

hands.

Do not run over, crush or pull the

power supply cable or extension

lead, otherwise it may be damaged.

Protect the cable from heat, oil and

sharp edges.

The extension lead must have a cross

section in accordance with the oper-

ating instructions and be protected

against splashed water. The connec-

tion must not be in water.

OBJ_BUCH-2341-001.book Page 11 Wednesday, September 24, 2014 1:30 PM

Похожие устройства