Home
Главная
Bosch
Несамоходные
ARM 3200 0.600.8A6.008
Инструкция к Bosch ARM 3200 06008A6008 Страница: 13

Bosch ARM 3200 0.600.8A6.008 Инструкция к Bosch ARM 3200 06008A6008 онлайн [13/181] 839464

Bosch ARM 3200 0.600.8A6.008 Инструкция к Bosch ARM 3200 06008A6008 онлайн [13/181] 839464

12 | English

F 016 L81 177 | (24.9.14) Bosch Power Tools

Always wear gardening gloves when

handling or working near the sharp

blades.

Electrical Safety

Warning! Switch off, remove plug

from mains before adjusting,

cleaning or if cable is cut, damaged

or entangled.

The blades continue to rotate for a

few seconds after the machine is

switched off.

Caution – do not touch the rotating

blade.

Your machine is double insulated for

safety and requires no earth connec-

tion. The operating voltage is 230 V AC,

50 Hz (for non-EU countries 220 V,

240 V as applicable). Only use ap-

proved extension cables. Contact your

Bosch Service Centre for details.

Extension cords/leads should only be

used if they comply with H05VV-F,

H05RN-F types or IEC type design

(60227 IEC 53, 60245 IEC 57).

If you want to use an extension cable

when operating your product, only the

following cable dimensions should be

used:

– 1.0 mm

2

: max. length 40 m

– 1.5 mm

2

: max. length 60 m

– 2.5 mm

2

: max. length 100 m

Note: If an extension cable is used it

must be earthed and connected

through the plug to the earth cable of

your supply network in accordance

with prescribed safety regulations.

If in doubt contact a qualified electri-

cian or the nearest Bosch Service Cen-

tre.

WARNING! Inadequate extension

cables can be dangerous. Exten-

sion cable, plug and socket must be

of watertight construction and in-

tended for outdoor use.

Cable connections should be kept dry

and off the ground.

It is recommended for increased elec-

trical safety to use a Residual Current

Device (RCD) with a tripping current of

not more than 30 mA. Always check

your RCD every time you use it.

The connection lead must be inspected

for signs of damage at regular intervals

and may only be used if in perfect con-

dition.

If the supply cord is damaged, it must

be replaced by a Bosch Service Centre.

For products not sold in GB:

WARNING: For your safety, it is re-

quired that the plug attached to the ma-

chine is connected with the extension

cord. The coupling of the extension

cord must be protected against splash

water, be made of rubber or coated

with rubber. The extension cord must

be used with a cable strain relief.

Products sold in GB only: Your prod-

uct is fitted with a BS 1363/A approved

electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket

outlets, it should be cut off and an ap-

propriate plug fitted in its place by an

authorised customer service agent.

The replacement plug should have the

same fuse rating as the original plug.

The severed plug must be disposed of

to avoid a possible shock hazard and

should never be inserted into a mains

socket elsewhere.

OBJ_BUCH-2341-001.book Page 12 Wednesday, September 24, 2014 1:30 PM

Похожие устройства