Brayer 1200 Вт, пар 16 г/мин, складной, съемная щетка, автоотключение BR4121 [4/19] 7 en en

6 7EN EN

THE UNIT IS INTENDED FOR HOUSEHOLD USE

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL

OR LABORATORY PURPOSES.

BEFORE THE FIRST USE

After the unit’s transportation or storage at negative

temperature, unpack it and wait for at least 3 hours

before using it.

• Unpack the unit and remove all the packaging

materials.

• If there is a protective lm on the operating surface

(5), remove it.

• Keep the original package.

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the unit for damages, in case of damage do

not plug it into the mains.

• Make sure that specied specications of power

supply voltage of the unit correspond to the

specications of your mains. When using the unit in

the mains with 60 Hz frequency, the unit does not

need any additional settings.

• Wipe the garment steamer body with a slightly damp

cloth and then wipe it dry.

GARMENT STEAMER PURPOSE

- The garment steamer can be used for careful

smoothing of folds on clothes or furniture.

- If you have doubts about steaming any certain kind of

fabric or clothes, you should follow the recommendations

on the product label.

- If no such information is available, try to steam the fabric

on the reverse side.

- When steaming such fabrics as silk or corduroy, keep the

garment steamer at some distance from the fabric.

- Use the brush attachment (5) to steam delicate fabrics

and to remove lint or threads from the fabric.

STEAMER OPERATION

• Press and hold the handle release button (2), unfold the

handle (1) and release the button (2).

WATER SELECTION

• Fill the water tank (3) with tap water. If tap water is

hard, we recommend mixing it with distilled water

in proportion 1:1. If tap water is too hard, mix it with

distilled water in proportion 1:2 or use distilled water

only.

ATTENTION!

Before detaching the water tank (3), make sure that the

power plug is not inserted into the mains socket.

• Take the water tank by the ledges on both sides and

remove it (3).

• Fill the water tank (3) with water non exceeding the

MAX mark.

• Do not ll the tank (3) with carbonated water,

perfume additives, vinegar, chemical agents, etc.

• Install the water tank (3) back to its place and make

sure that the tank (3) is xed properly.

ATTENTION!

Do not plug the garment steamer in if the water tank

(3) is empty.

• Hold the steamer by the handle (1).

• Insert the power plug to the mains socket, the

indicator (6) will light up. When the indicator (6) goes

out, you can start the steamer operation.

• To switch the steam supply on, press and hold down

the button (8).

• To switch the steam supply o release the button (8).

• For continuous steam supply, move the button (8)

towards the handle (1), to switch the continuous

steam supply o, move the button (8) in the opposite

direction.

• Before general use of the garment steamer clean the

steam chamber. To do this, direct the outgoing steam

to a piece of cloth, for instance, try to smooth out a

kitchen towel.

• If during the operation the water tank (3) becomes

empty, switch the garment steamer o before

removing the tank (3) and relling it with water. To

do this, disconnect the power plug from the mains

socket.

• After the unit operation, remove the power plug from the

mains socket and let the garment steamer cool down.

• Remove the water tank (3), drain the remaining water

and install the water tank back to its place.

• To reduce the size, press and hold the button (2), fold the

handle (1).

Note: when switching the unit on for the rst time, foreign

smell can appear. It is normal.

USING THE BRUSH ATTACHMENT

• Press and hold the handle release button (2), unfold the

handle (1) and release the button (2).

ATTENTION!

Before installing the brush attachment (5) and removing

the tank (3), make sure that the power plug is not

inserted into the mains socket.

• Install the brush attachment (5) on the operating surface

(4).

• Take the water tank by the ledges on both sides and

remove it (13).

• Fill the water tank (3) with water non exceeding the MAX

mark.

• Do not ll the tank (3) with carbonated water, perfume

additives, vinegar, chemical agents, etc.

• Install the water tank (3) back to its place and make sure

that the tank (3) is xed properly.

• Take the steamer by the handle (1).

Brayer 1200 Вт, пар 16 г/мин, складной, съемная щетка, автоотключение BR4121 [4/19] 7 en en

Содержание

Похожие устройства