Festool PLANEX LHS225-SW с пылеудаляющим аппаратом CTL36 Set 575448 Инструкция к товару онлайн [21/113] 842224
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Festool PLANEX LHS225-SW с пылеудаляющим аппаратом CTL36 Set 575448 Инструкция к товару онлайн [21/113] 842224

Festool PLANEX LHS225-SW с пылеудаляющим аппаратом CTM36 Set 575456 Инструкция к товару онлайн [21/113] 842225
21
Problem Possible causes Remedy
PLANEX switches
off during work – red
LED on the head of
the machine fl ashes
Dust fi lter on PLANEX clogged Clean the dust fi lter on the PLANEX.
Excessive pressure -> machine acti-
vates overheating protection
Allow the machine to cool and apply less
pressure; in extreme cases, switch on the
external extraction system and set the extrac-
tion control to setting 6.
PLANEX does not
function
Sanding pad blocked – is not run in
after change of pad.
Rotate sanding pad a few times by hand and
run in, also see chapter 7.3
Electrical plug is not connected cor-
rectly.
Check that the electrical plug is inserted
properly.
If other problems other than those listed occur, please contact your Festool service workshop or your
local specialist dealer.

Похожие устройства

Скачать