Hilti DCH 150-SL DLX 2159169 Инструкция к товару онлайн [23/384] 842578
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hilti DCH 150-SL DLX 2159169 Инструкция к товару онлайн [23/384] 842578

Hilti DCH 150-SL DLX 2159169 Инструкция к товару онлайн [23/384] 842578
*2208335*
2208335 English 19
Status Meaning
The service indicator shows red. However, the
power tool is in working order.
• The carbon brush wear limit has almost been
reached. You can continue working for a number
of hours after the indicator first shows, before
automatic cut-out is activated.
• The carbon brushes have been changed and
must be run in by letting the machine run under
no load for at least 1 minute without interruption,
in order to achieve the optimum service life.
3.5 Items supplied
Slitting tool, pin wrench, slitting discs, break-out tool, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
4.1 Slitting tool
For rated voltage, rated current and/or power, line frequency and rated speed, refer to the country-
specific type identification plate.
Information for users as per EN 61000-3-11: Switching on causes a brief drop in voltage. Other appliances
may be negatively affected on mains supplies where conditions are unfavorable. No malfunctions are to be
expected on mains supplies with an impedance of <0.15 ohms.
Weight in accordance with EPTA procedure 01
7.6 kg
Arbor diameter, wheel mount
22.2 mm
Thickness of the diamond slitting disc
≤ 3 mm
Diameter of the diamond slitting wheel
≤ 150 mm
4.2 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values
Emission sound pressure level (L
pA
)
94 dB(A)
Uncertainty for the sound pressure level (K
pA
)
3 dB(A)
Sound power level (L
WA
)
105 dB(A)
Uncertainty for the sound power level (K
WA
)
3 dB(A)
Total vibration
Vibration emission value (a
h
)
4.6 m/s²
Uncertainty (K)
1.5 m/s²

Похожие устройства

Скачать