Brayer 1903BR 250 Вт 5 поддонов размер 32x32 см регулировка температуры таймер 48 ч BR1903 Инструкция по эксплуатации онлайн [6/52] 846432

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the unit for damages, in case of damage do

not plug it into the mains.

• Make sure that specied specications of power

supply voltage of the unit correspond to the

specications of your mains. When the unit is used in

the mains with 60 Hz frequency, it does not need any

additional settings.

• Wash the lid (1) and grids (2) for dehydration with

warm water and neutral detergent, rinse and dry.

• Clean the food dehydrator body (3) with a damp

tissue and wipe it dry.

Attention! Do not submerge the body of the food

dehydrator (3) into water or other liquids. Ensure that no

water spills into the ventilation openings on the body (3)

of the food dehydrator.

• Before the rst use switch the dehydrator on with

no grids (2) and no lid (1) installed to deodorize the

heating element.

• Insert the power cord plug into the mains socket.

• Turn the knob (4) and set the temperature «70 ºС».

• • After 5-10 minutes switch the dehydrator o󰀨 by

setting the knob (4) to the position «OFF», unplug the

power cord from the electrical outlet.

Notes: small amounts of smoke and foreign odor are

to be expected during rst use. This is normal and does

not constitute a warrantable failure.

USING DEHYDRATOR

ATTENTION!

• The dehydration time for each food is individual and

dependent on its size, natural moisture content,

and also on the relative room humidity. For more

information see the «Drying Times & Temperature

Guide» section, see also the dehydration

temperature and time tables.

• Before dehydrating your foods, wash them, dry, and

chop or cut into thin slices.

• Lay out the foods onto grids (2) for dehydration at

a distance so as to ensure free passage of hot air

between the food chops or slices.

• Install the grids (2) on the shaft (pic. 1). Install at

least 3 grids (2) even if some of them are empty.

• Cover the grids (2) with the lid (1).

• Connect the power plug to an electrical outlet.

• Turn the knob (4) and set the required food

dehydration temperature.

• • Hot air enters from the bottom of the grids (2)

(pic. 1), the rotation of the grids (2) ensures even

blowing of the products with hot air, but the products

located on the lower grids (2) are more exposed

to hot air and dry faster. For even dehydration, it is

recommended to put moister food on the lower grids

(2).

• The hot air comes from below the grids (2), the foods

on the lower grids (2) are a󰀨ected by the hot air and

instr BR1903.indd 6instr BR1903.indd 6 27.02.2023 12:08:2427.02.2023 12:08:24

Brayer 1903BR 250 Вт 5 поддонов размер 32x32 см регулировка температуры таймер 48 ч BR1903 Инструкция по эксплуатации онлайн [6/52] 846432

Похожие устройства