Makita LXT BL 18 В, 460 Вт, D-рукоятка, d-30 см, M10xLH, разборвал (BL1830B DC18RC) DUR192LRF Инструкция по эксплуатации онлайн [16/52] 851294

16 ENGLISH

17. Unless the tool supports the use near

high-voltage electrical power lines, do not use

the battery cartridge near high-voltage electri-

cal power lines. It may result in a malfunction or

breakdown of the tool or battery cartridge.

18. Keep the battery away from children.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that

have been altered, may result in the battery bursting

causingres,personalinjuryanddamage.Itwill

also void the Makita warranty for the Makita tool and

charger.

Tips for maintaining maximum

battery life

1. Charge the battery cartridge before completely

discharged. Always stop tool operation and

charge the battery cartridge when you notice

less tool power.

Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

Charge the battery cartridge with room tempera-

ture at 10 °C - 40 °C (50 °F - 104 °F). Let a hot

battery cartridge cool down before charging it.

4. When not using the battery cartridge, remove

it from the tool or the charger.

5. Charge the battery cartridge if you do not use

it for a long period (more than six months).

PARTS DESCRIPTION

►Fig.2

1 Indicator lamps 2 Main power button 3 Battery cartridge 4 Lock-o󰀨lever

5 Switch trigger 6 Hanger 7 Handle 8 Pipes

9 Joint 10 Protector 11 Shoulder harness - -

*Allthecomponentslistedinthetablearetobeassembledasshowninthegureabove.

FUNCTIONAL

DESCRIPTION

WARNING: Always be sure that the tool is

switched o󰀨 and the battery cartridge is removed

before adjusting or checking function on the tool.

Failuretoswitcho󰀨andremovethebatterycartridge

mayresultinseriouspersonalinjuryfromaccidental

start-up.

Installing or removing battery

cartridge

CAUTION: Always switch o󰀨 the tool before

installing or removing of the battery cartridge.

CAUTION: Hold the tool and the battery car-

tridge rmly when installing or removing battery

cartridge. Failure to hold the tool and the battery

cartridgermlymaycausethemtoslipo󰀨yourhands

and result in damage to the tool and battery cartridge

andapersonalinjury.

►Fig.3: 1. Red indicator 2. Button 3. Battery cartridge

To remove the battery cartridge, slide it from the tool

while sliding the button on the front of the cartridge.

To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Insert it all the way until it locks in place

with a little click. If you can see the red indicator as

showninthegure,itisnotlockedcompletely.

CAUTION: Always install the battery cartridge

fully until the red indicator cannot be seen. If not,

itmayaccidentallyfalloutofthetool,causinginjuryto

you or someone around you.

CAUTION: Do not install the battery cartridge

forcibly. If the cartridge does not slide in easily, it is

not being inserted correctly.

Tool / battery protection system

The tool is equipped with a tool/battery protection system.

Thissystemautomaticallycutso󰀨powertothemotorto

extend tool and battery life. The tool will automatically

stop during operation and the indicator lamps light up if

the tool is placed under one of the following conditions:

►Fig.4: 1. Indicator lamps

Indicator lamps Protection

status

Color

Lighted O󰀨

Blinking

Green

Overload

Red

Overheat

Red

Over-

discharge

Makita LXT BL 18 В, 460 Вт, D-рукоятка, d-30 см, M10xLH, разборвал (BL1830B DC18RC) DUR192LRF Инструкция по эксплуатации онлайн [16/52] 851294

Похожие устройства