Makita LXT BL 18 В, 460 Вт, D-рукоятка, d-30 см, M10xLH, разборвал (BL1830B DC18RC) DUR192LRF Инструкция по эксплуатации онлайн [17/52] 851294

17 ENGLISH

Overload protection

If the tool gets into one of the following situation, the tool auto-

matically stops and the indicator lamp starts blinking in green:

— The tool or battery is overloaded by entangled

weeds or other debris.

— The cutting tool is locked.

— The main power button is turned on while the

switch trigger is being pulled.

In this situation, release the switch trigger and remove

entangled weeds or debris if necessary. After that, pull

the switch trigger again to resume.

CAUTION: If you need to remove the entan-

gled weeds on the tool or release the locked

cutting tool, be sure to turn the tool o󰀨 before you

start.

Overheat protection for tool or battery

When the tool or battery cartridge is overheated, the

tool stops automatically and the indicator lamp lights

up in red. Let the tool and/or battery cool down before

turning the tool on again.

Overdischarge protection

When the battery capacity becomes low, the tool stops

automatically. The indicator lamp starts blinking in red.

If the tool does not operate even when the switches are oper-

ated, remove the battery cartridge from the tool and charge it.

Indicating the remaining battery capacity

Only for battery cartridges with the indicator

►Fig.5: 1. Indicator lamps 2. Check button

Press the check button on the battery cartridge to indi-

cate the remaining battery capacity. The indicator lamps

light up for a few seconds.

Indicator lamps Remaining

capacity

Lighted O󰀨 Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

The battery

may have

malfunctioned.

NOTE: Depending on the conditions of use and the

ambienttemperature,theindicationmaydi󰀨erslightly

from the actual capacity.

NOTE:Therst(farleft)indicatorlampwillbrink

when the battery protection system works.

Main power switch

Tap the main power button to turn on the tool.

Toturno󰀨thetool,pressandholdthemainpower

buttonuntiltheindicatorlampsgoo󰀨.

►Fig.6: 1. Indicator lamps 2. Main power button

NOTE:Thetoolwillautomaticallyturnedo󰀨ifitisleft

without any operations for a certain period of time.

Switch action

WARNING: For your safety, this tool is

equipped with lock-o󰀨 lever which prevents the

tool from unintended starting. NEVER use the tool

if it runs when you simply pull the switch trigger

without pressing the lock-o󰀨 lever. Return the

tool to our authorized service center for proper

repairs BEFORE further usage.

WARNING: NEVER tape down or defeat pur-

pose and function of lock-o󰀨 lever.

CAUTION: Before installing the battery car-

tridge into the tool, always check to see that the

switch trigger actuates properly and returns to

the "OFF" position when released. Operating a tool

with a switch that does not actuate properly can lead

tolossofcontrolandseriouspersonalinjury.

CAUTION: Never put your nger on the main

power button and switch trigger when carrying

the tool. The tool may start unintentionally and cause

injury.

NOTICE: Do not pull the switch trigger hard with-

out pressing the lock-o󰀨 lever. This can cause

switch breakage.

To prevent the switch trigger from being accidentally

pulled,alock-o󰀨leverisprovided.Tostartthetool,

depressthelock-o󰀨leverandpulltheswitchtrigger.

The tool speed increases by increasing pressure on the

switch trigger. Release the switch trigger to stop.

►Fig.7: 1.Lock-o󰀨lever2. Switch trigger

NOTE:Thetoolisautomaticallyturnedo󰀨afterthe

tool is left for a certain period without any operations.

Speed adjusting

You can select the tool speed by tapping the main

power button. Each time you tap the main power button,

the level of speed will change.

►Fig.8: 1. Indicator lamps 2. Main power button

Indicator lamps Mode Rotation speed

High 0 - 6,000 min

-1

Low 0 - 4,500 min

-1

Makita LXT BL 18 В, 460 Вт, D-рукоятка, d-30 см, M10xLH, разборвал (BL1830B DC18RC) DUR192LRF Инструкция по эксплуатации онлайн [17/52] 851294

Похожие устройства