Bosch EasyGrassCut 26 06008C1J01 Инструкция по эксплуатации онлайн [21/332] 851657
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bosch EasyGrassCut 26 06008C1J01 Инструкция по эксплуатации онлайн [21/332] 851657

Bosch EasyGrassCut 26 06008C1J01 Инструкция по эксплуатации онлайн [21/332] 851657
English | 21
u Caution: Switch the garden tool off and pull the mains
plug before adjusting or cleaning.
u The cutting line continues to rotate for a few seconds
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching on again.
u Do not briefly switch off and on again several times in
a row.
u Only use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
Switching On and Off (see figure G)
To switch on, firstly press the lock-off button (2). Then
press the On/Off switch (3) and keep it pressed.
To switch off, release the On/Off switch (3).
Dismounting the spool, winding up the cutting
line and mounting the spool (see figures J to H)
u Remove the mains plug before replacing the spool.
Press both latches of the spool cover together and remove
the spool cover (9). Afterwards, remove the empty spool
(10).
Cut off approx. 4.0 m line from the refill roll. Slide one end of
the cutting line into the hole for line wind-up (11) in the
spool and wind up the cutting line uniformly and tightly.
Slide the other end of the cutting line through the hole for
line guiding (12) in the trimmer head and mount the spool
back into the trimmer head. Affix the spool by mounting the
spool cover .
Line Feeding (see figure K)
Semi-automatic Line Feeding
The trimmer is equipped with a semi-automatic feeding sys-
tem. The system feeds 10mm of the line with every press of
the on/off switch (3).
Manual Line Feeding
Press the line-feed button (13), and pull the cutting line out
to the desired length.
Troubleshooting
Problem Possible Cause Corrective Action
Motor refuses to start Power turned off Turn power on
Mains socket faulty Use another socket
Extension cable damaged Inspect cable, replace if damaged
Fuse faulty / blown Replace fuse
Garden tool functions
intermittently
Extension cable damaged Inspect cable, replace if damaged
Internal wiring of garden tool defective Contact Bosch customer service agent
Garden product la-
bours
Grass too high Cut in stages
Garden tool does not
cut
Cutting line too short/broken off Manually feed cutting line
Spool empty Replace line spool
Cutting line can no
longer be fed
Line inside the spool entangled Inspect the spool, rewind if necessary
Spool empty Refill line spool
Line retracts into spool Cutting line too short/broken off
Remove spool – rethread line (see figures H − J)
Line breaks frequently Line inside the spool entangled
Remove spool – rewind line (see figures H − J)
Trimmer used incorrectly Only trim with the tip of the line, avoid stones,
walls and other hard objects. Feed the line regu-
larly to maintain full cutting diameter.
Heavy vibrations Cutting line broken
Cutting system damaged
Grass between spool housing and line-feed but-
ton
Grass in hole for line feed
Pull out cutting line with manual feed (see figure
K)
Contact Bosch customer service agent
Disassemble spool cover and remove grass
Remove grass from hole for line feed
Bosch Power Tools F 016 L94 303 | (22.07.2021)

Похожие устройства

Скачать