Makita LXT BL без аккумулятора и ЗУ DTW700Z [8/96] Changing the application mode

Makita LXT BL без аккумулятора и ЗУ DTW700Z [8/96] Changing the application mode

8 ENGLISH

Changing the application mode

Changing the impact force

You can change the impact force in four steps: 4 (max), 3 (hard), 2 (medium), and 1 (soft).

This allows a tightening suitable to the work.

The level of the impact force changes every time you press the button .

You can change the impact force within approximately one minute after releasing the switch trigger.

NOTE: You can extend the time to change the impact force approximately one minute if you press the but-

ton

or .

► Fig.7

Application mode

(Impact force grade displayed on panel)

Maximum blows Purpose

4 (Max)

2,700 min

-1

(/min) Tightening with the maximum force and

speed.

Tightening when the force and the speed

are desired.

3 (Hard)

2,400 min

-1

(/min) Tightening with less force and speed than

Max mode (easier to control than Max

mode).

Tightening when the force and the speed

are desired.

2 (Medium)

1,700 min

-1

(/min) Tightening when a good nishing is

needed.

Tightening when you need good control

power.

1 (Soft)

1,000 min

-1

(/min) Tightening with less force to avoid screw

thread breakage.

Tightening when you need ne adjustment

with small diameter bolts.

: The lamp is on.

NOTE: When none of the lamp on the panel is lit, pull the switch trigger once before pressing the button

.

NOTE: All lamps on the switch panel go out when the tool is turned o󰀨 to save the battery power. The impact force

grade can be checked by pulling the switch trigger to the extent that the tool does not operate.

Содержание

Похожие устройства