Makita M9507 190322 Инструкция к товару онлайн [5/24] 853648

5 ENGLISH

5. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

arecausedbypoorlymaintainedpowertools.

6. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

arelesslikelytobindandareeasiertocontrol.

7. Use the power tool, accessories and tool bits

etc. in accordance with these instructions, tak-

ing into account the working conditions and

the work to be performed. Use of the power tool

for operations different from those intended could

result in a hazardous situation.

Service

1. Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

2. Follow instruction for lubricating and chang-

ing accessories.

3. Keep handles dry, clean and free from oil and

grease.

Grinder safety warnings

Safety Warnings Common for Grinding Operations:

1. This power tool is intended to function as a

grinder. Read all safety warnings, instructions,

illustrations and specications provided with

this power tool. Failure to follow all instructions

listedbelowmayresultinelectricshock,reand/

orseriousinjury.

Operations such as sanding, wire brushing,

polishing or cutting-off are not recommended

to be performed with this power tool. Operations

for which the power tool was not designed may

createahazardandcausepersonalinjury.

3. Do not use accessories which are not speci-

cally designed and recommended by the tool

manufacturer.Justbecausetheaccessorycan

beattachedtoyourpowertool,itdoesnotassure

safe operation.

4. The rated speed of the accessory must be at

least equal to the maximum speed marked on

the power tool. Accessories running faster than

theirratedspeedcanbreakandyapart.

5. The outside diameter and the thickness of your

accessory must be within the capacity rating

of your power tool. Incorrectly sized accessories

cannotbeadequatelyguardedorcontrolled.

Threaded mounting of accessories must match

the grinder spindle thread. For accessories

mounted by anges, the arbour hole of the

accessory must t the locating diameter of the

ange. Accessories that do not match the mounting

hardwareofthepowertoolwillrunoutofbalance,

vibrateexcessivelyandmaycauselossofcontrol.

Do not use a damaged accessory. Before each

use inspect the accessory such as abrasive

wheels for chips and cracks, backing pad for

cracks, tear or excess wear. If power tool or

accessory is dropped, inspect for damage or

install an undamaged accessory. After inspecting

and installing an accessory, position yourself and

bystanders away from the plane of the rotating

accessory and run the power tool at maximum

no-load speed for one minute. Damaged accesso

rieswillnormallybreakapartduringthistesttime.

Wear personal protective equipment.

Depending on application, use face shield,

safety goggles or safety glasses. As appropri-

ate, wear dust mask, hearing protectors, gloves

and workshop apron capable of stopping small

abrasive or workpiece fragments. The eye pro-

tectionmustbecapableofstoppingyingdebris

generatedbyvariousoperations.Thedustmask

orrespiratormustbecapableofltratingparticles

generatedbyyouroperation.Prolongedexposure

to high intensity noise may cause hearing loss.

9. Keep bystanders a safe distance away from

work area. Anyone entering the work area

must wear personal protective equipment.

Fragmentsofworkpieceorofabrokenaccessory

mayyawayandcauseinjurybeyondimmediate

area of operation.

10. Hold the power tool by insulated gripping

surfaces only, when performing an operation

where the cutting accessory may contact hid-

den wiring or its own cord.Cuttingaccessory

contacting a "live" wire may make exposed metal

parts of the power tool “live” and could give the

operator an electric shock.

11. Position the cord clear of the spinning acces-

sory.Ifyoulosecontrol,thecordmaybecutor

snaggedandyourhandorarmmaybepulledinto

the spinning accessory.

12. Never lay the power tool down until the acces-

sory has come to a complete stop. The spinning

accessorymaygrabthesurfaceandpullthe

power tool out of your control.

13. Do not run the power tool while carrying it at

your side. Accidental contact with the spinning

accessory could snag your clothing, pulling the

accessoryintoyourbody.

14. Regularly clean the power tool’s air vents. The

motor’s fan will draw the dust inside the housing

and excessive accumulation of powdered metal

may cause electrical hazards.

15. Do not operate the power tool near ammable

materials. Sparks could ignite these materials.

16. Do not use accessories that require liquid

coolants.Usingwaterorotherliquidcoolants

may result in electrocution or shock.

Kickback and Related Warnings

Kickbackisasuddenreactiontoapinchedorsnagged

rotatingwheel,backingpad,brushoranyotheracces-

sory. Pinching or snagging causes rapid stalling of the

rotating accessory which in turn causes the uncon-

trolledpowertooltobeforcedinthedirectionopposite

oftheaccessory’srotationatthepointofthebinding.

Forexample,ifanabrasivewheelissnaggedor

pinchedbytheworkpiece,theedgeofthewheelthatis

entering into the pinch point can dig into the surface of

thematerialcausingthewheeltoclimboutorkickout.

Thewheelmayeitherjumptowardorawayfromthe

operator, depending on direction of the wheel’s move-

mentatthepointofpinching.Abrasivewheelsmayalso

breakundertheseconditions.

Makita M9507 190322 Инструкция к товару онлайн [5/24] 853648

Похожие устройства