Makita M9507 190322 Инструкция к товару онлайн [6/24] 853648

6 ENGLISH

Kickbackistheresultofpowertoolmisuseand/or

incorrectoperatingproceduresorconditionsandcanbe

avoidedbytakingproperprecautionsasgivenbelow.

1. Maintain a rm grip on the power tool and

position your body and arm to allow you to

resist kickback forces. Always use auxiliary

handle, if provided, for maximum control over

kickback or torque reaction during start-up.

Theoperatorcancontroltorquereactionsorkick-

backforces,ifproperprecautionsaretaken.

2. Never place your hand near the rotating acces-

sory.Accessorymaykickbackoveryourhand.

3. Do not position your body in the area where

power tool will move if kickback occurs.

Kickbackwillpropelthetoolindirectionopposite

to the wheel’s movement at the point of snagging.

4. Use special care when working corners, sharp

edges etc. Avoid bouncing and snagging the

accessory.Corners,sharpedgesorbouncing

have a tendency to snag the rotating accessory

andcauselossofcontrolorkickback.

5. Do not attach a saw chain woodcarving blade

or toothed saw blade.Suchbladescreatefre-

quentkickbackandlossofcontrol.

Safety Warnings Specic for Grinding Operation:

1. Use only wheel types that are recommended

for your power tool and the specic guard

designed for the selected wheel. Wheels for

whichthepowertoolwasnotdesignedcannotbe

adequatelyguardedandareunsafe.

2. The grinding surface of centre depressed

wheels must be mounted below the plane of

the guard lip. An improperly mounted wheel that

projectsthroughtheplaneoftheguardlipcannot

beadequatelyprotected.

3. The guard must be securely attached to the

power tool and positioned for maximum safety,

so the least amount of wheel is exposed

towards the operator. The guard helps to protect

theoperatorfrombrokenwheelfragments,acci-

dental contact with wheel and sparks that could

ignite clothing.

4. Wheels must be used only for recommended

applications. For example: do not grind with

the side of cut-off wheel.Abrasivecut-offwheels

are intended for peripheral grinding, side forces

applied to these wheels may cause them to

shatter.

5. Always use undamaged wheel anges that are

of correct size and shape for your selected

wheel.Properwheelangessupportthewheel

thusreducingthepossibilityofwheelbreakage.

Flangesforcut-offwheelsmaybedifferentfrom

grindingwheelanges.

6. Do not use worn down wheels from larger

power tools. Wheel intended for larger power tool

isnotsuitableforthehigherspeedofasmaller

toolandmayburst.

Additional Safety Warnings:

1. When using depressed centre grinding wheels,

be sure to use only berglass-reinforced

wheels.

2. NEVER USE Stone Cup type wheels with this

grinder. This grinder is not designed for these

types of wheels and the use of such a product

mayresultinseriouspersonalinjury.

3. Be careful not to damage the spindle, the

ange (especially the installing surface) or the

lock nut. Damage to these parts could result in

wheel breakage.

4. Make sure the wheel is not contacting the

workpiece before the switch is turned on.

5. Before using the tool on an actual workpiece,

let it run for a while. Watch for vibration or

wobbling that could indicate poor installation

or a poorly balanced wheel.

6. Use the specied surface of the wheel to per-

form the grinding.

7. Do not leave the tool running. Operate the tool

only when hand-held.

8. Do not touch the workpiece immediately after

operation; it may be extremely hot and could

burn your skin.

9. Observe the instructions of the manufacturer

for correct mounting and use of wheels.

Handle and store wheels with care.

10. Do not use separate reducing bushings or

adaptors to adapt large hole abrasive wheels.

11. Use only anges specied for this tool.

12. For tools intended to be tted with threaded

hole wheel, ensure that the thread in the wheel

is long enough to accept the spindle length.

13. Check that the workpiece is properly

supported.

14. Pay attention that the wheel continues to

rotate after the tool is switched off.

15. If working place is extremely hot and humid,

or badly polluted by conductive dust, use a

short-circuit breaker (30 mA) to assure opera-

tor safety.

16. Do not use the tool on any materials contain-

ing asbestos.

17. Do not use cloth work gloves during operation.

Fibersfromclothglovesmayenterthetool,which

causestoolbreakage.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

Makita M9507 190322 Инструкция к товару онлайн [6/24] 853648

Похожие устройства