Makita M9507 190322 Инструкция к товару онлайн [7/24] 853648

7 ENGLISH

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the tool is

switched off and unplugged before adjusting or

checking function on the tool.

Shaft lock

Press the shaft lock to prevent spindle rotation when

installing or removing accessories.

►Fig.1: 1. Shaft lock

NOTICE: Never actuate the shaft lock when the

spindle is moving.Thetoolmaybedamaged.

Switch action

CAUTION: Before plugging in the tool, always

check to see that the slide switch actuates prop-

erly and returns to the "OFF" position when the

rear of the slide switch is depressed.

CAUTION: Switch can be locked in "ON" posi-

tion for ease of operator comfort during extended

use. Apply caution when locking tool in "ON"

position and maintain rm grasp on tool.

To start the tool, slide the slide switch toward the “I

(ON)”positionbypushingtherearoftheslideswitch.

For continuous operation, press the front of the slide

switch to lock it.

To stop the tool, press the rear of the slide switch, then

slide it toward the “O (OFF)” position.

►Fig.2: 1. Slide switch

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and unplugged before carrying out

any work on the tool.

Installing side grip (handle)

Optional accessory for M9506 in some countries

CAUTION: Always be sure that the side grip is

installed securely before operation.

Screw the side grip securely on the position of the tool

asshowninthegure.

►Fig.3

Installing or removing wheel guard

(For depressed center wheel)

WARNING: When using a depressed center

wheel, the wheel guard must be tted on the tool

so that the closed side of the guard always points

toward the operator.

Mount the wheel guard with the protrusions on the

wheelguardbandalignedwiththenotchesonthebear-

ingbox.Thenrotatethewheelguardtosuchanangle

that it can protect the operator according to work. Be

sure to tighten the screw securely.

To remove wheel guard, follow the installation proce-

dure in reverse.

►Fig.4: 1. Wheel guard 2.Bearingbox3. Screw

Installing or removing depressed

center wheel

Optional accessory

WARNING: When using a depressed center

wheel, the wheel guard must be tted on the tool

so that the closed side of the guard always points

toward the operator.

CAUTION: Make sure that the mounting part

of the inner ange ts into the inner diameter of

the depressed center wheel perfectly. Mounting

theinnerangeonthewrongsidemayresultinthe

dangerousvibration.

Mounttheinnerangeontothespindle.Makesuretot

thestraightpartoftheinnerangeontothestraightpart

atthebottomofthespindle.Fitthedepressedcenter

wheelontheinnerangeandscrewthelocknutonto

the spindle.

In case of mounting a depressed center wheel thinner

than 4 mm (5/32"), place the lock nut so that the protru-

sion on the lock nut faces outside. Otherwise, place it

sothattheprotrusiononittsintotheinnerdiameterof

the wheel.

►Fig.5: 1. Lock nut 2. Depressed center wheel

3.Innerange4. Mounting part

Totightenthelocknut,presstheshaftlockrmlyso

that the spindle cannot revolve, then use the lock nut

wrench and securely tighten clockwise.

►Fig.6: 1. Lock nut wrench 2. Shaft lock

To remove the wheel, follow the installation procedure

in reverse.

Makita M9507 190322 Инструкция к товару онлайн [7/24] 853648

Похожие устройства