Home
Главная
Stadler Form
Ультразвуковые
Eva WiFi white E-008
Инструкция по эксплуатации Страница: 9

Stadler Form Eva WiFi white E-008 Инструкция по эксплуатации онлайн [9/100] 854187

output level automatically in order to reach and maintain the desired

humidity of 45 % quietly and in an energy-efficient way. The lower the

current humidity is, the higher the humidification output level will auto-

matically be set (under 33 % = level 4, from 34 % – 37 % = level 3, from

38 % – 41 % = level 2, from 42 % – 45 % = level 1). You can change the

desired humidity in auto mode by pressing the “Hygrostat” button (11)

several times while auto mode is active (the LED on the “Auto” button

on the unit is on). The humidification output level (12) cannot be altered

manually in auto mode. As soon as the “Output” button (12) is pressed

to change the humidification output level, the auto mode is deactivated.

11. You can use Eva to disperse fragrances in the room. Be extremely spar-

ing with fragrances because an excessive dosage can result in the mal-

functioning of, and damage to, the appliance. In order to use fragrances,

briefly press and release the fragrance container (20) and pull it out of

the appliance. Let the fragrance drip directly onto the cotton pad in the

fragrance container (20). Add a maximum of 1 – 2 drops of fragrance

into the fragrance container! Push the container back again and press

and release it to lock it. Tip: in order to change the fragrance, remove

the cotton pad and clean the container with soap. Now you may insert

a new cotton pad (commercially available) and add drops of the desired

fragrance.

12. If the water level indicator (16) changes to red, the water must be re-

filled. Remove the water tank (6) and fill it with clean, cold tap water

up to the maximum mark. Replace the water tank and press the on/off

button (10). The appliance will resume operation after a few seconds.

The water tank can also be refilled during operation.

13. If you find the lamps too bright (in a bedroom, for example), you may

reduce the light intensity by pressing the night mode key (21):

• Normal mode (default mode)

• Dimmed mode (push once)

• Lights-out mode (push twice)

• By pushing the dimmer button once more, you can go back into nor-

mal mode.

If there is no water in the appliance, the red water level symbol (16)

lights up in all modes. The red light cannot be dimmed.

14. If two dots are shown (22) on the display (15), Eva cannot establish a

radio connection to the Remote Sensor

(2). Eva still functions thanks

to a humidity sensor within the appliance. Press any button on the Re-

mote Sensor

(2) to activate it. Make sure that the Remote Sensor

(2) is within a 10 m radius of Eva. Walls, doors and floors between Eva

and the Remote Sensor

(2) can disrupt the radio connection. The Re-

mote Sensor

(2) should be optimally positioned at a distance between

3 – 5 m from Eva and on an elevated surface in the middle of the room

(see «Setup/operation» No. 3). The two dots on the display (22) could

also indicate that the batteries in the Remote Sensor

(2) need replac-

ing (see «Setup/operation» No. 2).

15. Press the button for night mode (21) for 5 seconds to connect Eva to the

“Smart Life – Smart Living“ app from Tuya Inc. (available from the App

Store and via Google Play) on your smartphone. The flashing water level

indicator (16) shows that WiFi is switched on. You can control all the

functions of the appliance via the app and monitor the air quality in real

time, even when you are not at home. For more detailed information on

Stadler Form Eva WiFi white E-008 Инструкция по эксплуатации онлайн [9/100] 854187

Похожие устройства