Philips AWH1006/51(55LA) Руководство по эксплуатации онлайн [11/28] 857458

EN 8

Introduction about the display

8.3 Method of use

CAUTION:

● Turn on the power



supply has been connected, and the water heater will enter the standby state.

● Power on

，，the water heater will

start up, and after displaying the current set temperature for 3 seconds, it will automatically switch to display the

current outlet water temperature, and the water heater will start heating .

● Operation

During the working process, you can press the " "button or " " button to adjust the set temperature. Each time

you press the " " button or " " button, the temperature will increase or decrease by one degree. Press the " "

button or " " button continuously for 1.5 For more than 1 second, the temperature setting value increases or

decreases continuously, and the temperature setting value range: 30‒55°C.

● Power oﬀ



Notes before connected to the power:

● Check whether the leakage protection switch is installed in a suitable position and whether it can operate.

●

● Check whether there is any water leakage at each interface, and then turn on the appliance only when

wa

● Whe

body under the water to avoid being scalded by hot water.

● Users are requested to maintain good habits: it is recommended to turn on the water before turning on

the

Figure F

● 

The normal display temperature of the water heater in Celsius is "°C".

The fault code display: When the water heater encounters a malfunction, it displays the fault codes (EC, HE, E5, E1).

● " ℃ " , Temperature unit

● " " , Protection state display

When the water heater is operating normally, it will be steadily lit to indicate the entry into protection state. When the





malfunction, it displays the fault codes (EC, HE, E5, E1).

● " " , Heating state display



operation of the water heater; when the characters are not illuminated, it indicates that the water heater is not in

operation.