Timberk N28, 50л. T-WSS50-N28-V Инструкция по эксплуатации онлайн [24/44] 857580

IM2022

WARNING!

If water in the installation place has significant content of calcium, manganese

or iron salts, it is necessary to install a suitable filter in the water supply system

in order to reduce the amount of scale in the tank and on the heating element.

Connection to the electric main

WARNING!

Before connecting the tank water heater, make sure the water heater is

properly grounded. Proper grounding is important to minimize electrocution

and fire hazard. The power cord is equipped with a plug with a grounding

contact. The product must be used with a properly grounded main socket.

1. The water heater is designed to be connected to a 220V single-phase

electric main. Before connecting, make sure that the power supply at the site

of connection complies with the parameters indicated on the plate with the

specifications of the product. When installing the heater, comply with the

applicable electrical safety precautions.

2. The main socket must be designed for rated current of at least 10A and

electric cable with core cross section of at least 3x1.5 mm

(for copper).

3. The plug and socket must be kept dry to avoid electrical leakage.

NOTE!

Install the electric socket in places or on walls that may be splashed with water

at a height of at least 1.8 m.

4.Make sure that the electric plug is tightly connected to the socket on a

regular basis. Check it as follows: insert the electric plug into the socket, turn

off the water heater after 30 minutes of operation and remove the plug from

the socket; check with your hand whether the plug is hot. If the plug is hotter

than 50 °C, replace the socket to avoid damage, accidents, or fire due to poor

electrical contact. Checks must be conducted by a specialist.

WARNING!

Using a water heater without grounding is not safe for your life.