Timberk R20 40л. T-WSS40-R20-V Инструкция по эксплуатации онлайн [25/48] 857582

IM2022

2. To connect the water heater to the water main, 12 mm (G1/2) diameter pipes

are used.

3. Use rubber seal gaskets on the threaded ends of the pipes in order to prevent

leakage when connecting the pipes.

4. Screw the safety relief valve on the inlet nozzle, which is marked in blue and

has a water flow direction arrow in such a way that that the water flow coincides

with the direction of the arrow on the valve body. Put the water drainage tube*

(water may appear during heating) on the pressure relief port of the safety relief

valve to allow water drainage into the sewer (see Fig. 6) (the tube must be

directed downwards and must not be bent).

5. To facilitate the maintenance of the water heater, it is recommended to install

a drain tap and a tee between the cold water inlet pipe and the safety valve.

This tee will help to drain the water from the water heater faster. For

convenience, it is recommended to connect a water drain hose*to the cut-off tap

of the tee. This hose will allow you to direct the water drained from the water

heater to the sewer or other place of your choice.

6. Connect the required number of water consumption points to the outlet nozzle

marked in red.

7. Open the shut-off valve of the water main and one of the outlet valves. When

the tank is full, which is prompted by water leaking from the outlet valve, close

the outlet valve and make sure that all connectors are tight.

* not included in the scope of delivery. New hoses must be used, old hoses

must not be reused

WARNING!

Do not operate the water heater without a safety relief valve installed on the inlet

nozzle.

WARNING!

The pressure-relief device must be activated on a regular basis to remove the

scale and ensure proper operation.

WARNING!

If water in the installation place has significant content of calcium, manganese

or iron salts, it is necessary to install a suitable filter in the water supply system

in order to reduce the amount of scale in the tank and on the heating element.

Connection to the electric main

WARNING!

Before connecting the tank water heater, make sure the water heater is properly

grounded. Proper grounding is important to minimize electrocution and fire

hazard. The power cord is equipped with a plug with a grounding contact. The

product must be used with a properly grounded main socket.