Makita CXT DF032DWAE [2/12] Ec declaration of conformity
![Makita CXT DF032DWAE [2/12] Ec declaration of conformity](/views2/1399240/page2/bg2.png)
2 ENGLISH
SPECIFICATIONS
Model: DF332D DF032D
Drilling capacities Steel 10 mm
Wood 28 mm
Fastening
capacities
Wood screw 5.1 mm x 63 mm
Machine screw M6
No load speed High (2) 0 - 1,500 min
-1
Low (1) 0 - 450 min
-1
Overall length 154 mm 124 mm
Rated voltage D.C. 10.8 V - 12 V max
Battery cartridge BL1016, BL1021B BL1041B BL1016, BL1021B BL1041B
Net weight 1.0 kg 1.2 kg 0.88 kg 1.0 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Cd
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model DF332D
Sound pressure level (L
pA
) : 72 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model DF032D
Sound pressure level (L
pA
) : 71 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model DF332D
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Model DF032D
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
NOTE:
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Cordless Driver Drill
Model No./ Type: DF332D, DF032D
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents: EN60745
Thetechnicalleinaccordancewith2006/42/ECis
available from:
Содержание
- Cordless driver drill 1
- Ec declaration of conformity 2
- Intended use 2
- Specifications 2
- Symbols 2
- Vibration 2
- Warning 2
- General power tool safety warnings 3
- Save all warnings and instruc tions for future reference 3
- Warning 3
- Caution 4
- Cordless driver drill safety warnings 4
- Important safety instructions for battery cartridge 4
- Save these instructions 4
- Tips for maintaining maximum battery life 4
- Warning 4
- Battery protection system 5
- Caution 5
- Functional description 5
- Indicating the remaining battery capacity 5
- Installing or removing battery cartridge 5
- Caution 6
- Lighting up the front lamp 6
- Reversing switch action 6
- Speed change 6
- Switch action 6
- 1 adjustingring 2 graduation 3 arrow 7
- 1 sleeve 2 close 3 open 7
- Adjusting the fastening torque 7
- Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool 7
- Assembly 7
- Caution 7
- English 7
- For model df332d optional accessory 7
- Installing or removing driver bit drill bit 7
- Thefasteningtorquecanbeadjustedin21stepsbyturningtheadjustingring alignthegraduationswiththearrow on the tool body you can get the minimum fastening torque at 1 and maximum torque at marking the clutch will slip at various torque levels when set at the number 1 to 20 the clutch does not work at the marking before actual operation drive a trial screw into your material or a piece of duplicate material to determine which torque level is required for a particular application the following shows the rough guide of the relationship between the screw size and graduation 7
- Tochangethespeed switchoffthetoolfirst select the 2 side for high speed or 1 for low speed but high torque be sure that the speed change lever is set to the correct position before operation if the tool speed is coming down extremely during the operation with 2 slide the lever to the 1 and restart the operation 7
- Installing hook 8
- Installing or removing driver bit socket bit 8
- Caution 9
- Drilling in metal 9
- Drilling in wood 9
- Drilling operation 9
- Installing driver bit holder 9
- Operation 9
- Screwdriving operation 9
- Caution 10
- Maintenance 10
- Notice 10
- Optional accessories 10
- Using holster 10
- Using the tool as a hand screwdriver 10
- Anjo aichi japan 12
- Jan baptist vinkstraat 2 3070 belgium 12
- Makita 12
- Makita corporation 12
- Www makita com 12
Похожие устройства
- Apecs 5300-M-WC-CR 15734 Чертеж
- Makita CXT DF033DZ Руководство по эксплуатации
- Apecs 5300-P-WC-CR 18135 Чертеж
- Apecs 5300-M-AB 15739 чертеж
- Apecs 5300-M-AB 15739 инструкция
- Apecs 5300-M-CR 15738 Чертёж
- Apecs 5300-M-CR 15738 инструкция
- Apecs 5300-M-GRF 25325 инструкция
- Apecs 5300-M-S 16933 чертеж
- Apecs 5300-M-S 16933 инструкция
- Apecs 1900-INOX 15715 паспорт
- Apecs 1900-INOX 15715 чертёж
- AVERS 2000-ZN 22561 Эскиз
- AVERS 2000-ZN 22561 Паспорт
- MVI 1 1/2" BF.597.08 Инструкция к MVI BF.597.08
- KALE KILIT 476LR, 85BS64, 35CP, 5K (56 мм), w/o SP, w/o Ros, STB 476LR000001 Схема
- AVERS R12/S6-CR 20066 Инструкция
- KALE KILIT 257L, BS60, 28CP, 4K (75 мм), w/o SP, w/o Ros, PB 257L0000040 Схема
- Punto KIT P16 4070 CRONA SN матовый никель 41713 Инструкция к товару
- Apecs 1026/60-CR 0108 03171 Инструкция к товару