Makita LXT DLM382CM2 [15/100] Installing the mower blade

Makita DLM432PT2 [15/100] Installing the mower blade
15 ENGLISH
Storage
WARNING: When carrying or storing the
mower, do not hold the folded handles but the
front grip of the mower. Holding the folded handles
maycauseaseriousinjuryordamagetothemower.
Beforestoringthemower,removethebatterycartridge
andlockkey.
Storemowerindoorsinacool,dryandlockedplace.
Don't store the mower and charger in locations where
thetemperaturemayreachorexceed40°C.
►Fig.28: 1. Front grip 2. Rear grip
1. Loosen the clamping screws and expand the
lower handle to both sides. Move down the handle for-
ward.Atthistime,keeparmgriponthelowerhandle
so that the handle does not fall down to the far side from
themowerbody.
►Fig.29: 1. Clamping screw 2. Lower handle
2. Loosen the clamping nuts and pivot the upper
handle back while expanding the both sides.
►Fig.30: 1. Clamping nut 2. Upper handle
3. Store the grass basket between the handle and
themowerbody.
►Fig.31: 1. Grass basket
NOTE: When putting the mower in the upright posi-
tion, do not hold the handle but use the front grip of
the mower.
Removing or installing the mower
blade
WARNING: Always remove the lock key and
battery cartridge when removing or installing the
blade. Failure to remove the lock key and battery
cartridge may cause a serious injury.
WARNING: The blade coasts for a few sec-
onds after releasing the switch. Do not start any
operation until the blade comes to a complete
stop.
WARNING: Always wear gloves when han-
dling the blade.
Removing the mower blade
For DLM382
1. Put the mower on its side so that the mowing
heightadjustinglevercomestotheupperside.
2. To lock the blade rotation, insert a screwdriver or a
similartoolintoaholeonthemowerbody.
3. Turn the bolt counterclockwise with the wrench.
►Fig.32: 1. Mower blade 2. Screwdriver 3. Wrench
4. Remove the bolt and blade in order.
►Fig.33: 1. Blade support 2. Mower blade 3. Bolt
For DLM432
1. Put the mower on its side so that the mowing
heightadjustinglevercomestotheupperside.
2. To lock the blade rotation, insert a screwdriver or a
similartoolintoaholeonthemowerbody.
3. Turn the bolt counterclockwise with the wrench.
►Fig.34: 1. Mower blade 2. Screwdriver 3. Wrench
4. Removethebolt,outerange,mowerblade,and
innerangeinorder.
►Fig.35: 1.Innerange2. Mower blade 3. Outer
ange4. Bolt
Installing the mower blade
To install the mower blade, take the removal procedure
in reverse.
WARNING: Install the mower blade carefully.
It has a top/bottom facing. Place the blade so that
the rotational direction arrow faces outward.
WARNING: Tighten the bolt clockwise rmly
to secure the blade.
WARNING: Make sure that the mower blade
and all the xing parts are installed correctly and
tightened securely.
WARNING: When you replace the blades,
always follow the instructions provided in this
manual.

Содержание

Похожие устройства

Скачать