Metabo FSD 36-18 LTX BL 40 18В, 2 x 5.2 Ач + ASC55 T0519 Инструкция онлайн [18/132] 860775

ENGLISHen

WARNING! Remove the battery packs (14) .

Unintentional startup can cause serious

injuries. The machine must be stationary.

WARNING! Danger of injury from sharp

cutting edge on the line cutter (9) and on the

blade (24). Wear protective gloves.

8.1 Cleaning

• Clean after each use: Remove grass clippings,

leaves, dirt and other deposits.

8.2 Transporting, storage

• Clean the machine before storage.

• Always keep the cutting line moist. A dry cutting

line breaks off more quickly and wears out faster.

E.g. remove the cutting line from the reel and

store in a bowl of water.

• Make sure that the machine does not have any

loose or damaged parts.

If necessary:

- Replace damaged parts.

-Tighten the screws.

- If necessary have them repaired in a specialist

workshop.

• Store the machine in a dry place.

• Ensure that children cannot get anywhere near

the machine.

• FSB 36-18 LTX BL 40: For space-saving

transport or storage, the handle bar (32) can be

rotated by 90° after loosening the wing screw (31)

. Retighten the wing screw (31).

• For storage and transport, always slide on the

protective cover onto the blade.

• Secure in a safe position for transport.

WARNING! Remove the battery packs (14) .

Unintentional startup can cause serious

injuries. The machine must be stationary.

WARNING! Danger of injury from sharp

cutting edge on the line cutter (9) and blade

(24). Wear protective gloves.

9.1 General maintenance

• Check the machine for damaged, missing or

loose parts such as screws, nuts, bolts and caps

before each use.

• Check the machine before each use for damage

and ageing and have it repaired in a specialist

workshop immediately if necessary.

• Tighten all fasteners and caps properly.

• Clean the machine with a dry cloth. Do not use

water.

• Never service damaged battery packs.

Service of battery packs should only be

performed by the manufacturer or authorized

service providers.

9.2 Replacing cutting line

See chapter 6.3.

Order number see chapter 11.

9.3 Dull blade

WARNING! A blunt or incorrectly sharpened

blade (24) increases the risk of kickback.

A blunt blade (24) can be rotated by 180°. If both

sides are blunt, it is advisable to have it sharpened

and balanced in a specialist workshop. Check

blades regularly for damage and have them

repaired in a specialist workshop immediately if

necessary.

9.4 Lubrication

Lubrication is not required.

One LED of the capacity display (15) flashes.

Battery pack empty.

- Charge the battery packs .

Machine emits a lot of noise.

Cutting line is too short.

- Readjust cutting line (see chapter 7.5)

All LEDs of the capacity and signal display (15)

flash.

Overload.

- Let the machine cool down.

- Move forward more slowly.

The machine does not start.

The battery pack performance is weak.

- Charge the battery packs .

The machine vibrates heavily.

The blade (24) is not balanced or worn.

- Replace the blade (24).

The cutting line (16) is not the same length on both

side.

- Readjust the cutting line. See chapter (7.5).

The machine stops during the mowing

process.

Battery pack empty.

- Charge the battery packs .

There is a blockage.

- Remove the battery packs (14) . Check the blade

(24) / the line head (29).

The operating temperature of the machine is too

high.

- Let the machine cool down.

Use only original Metabo or CAS (Cordless Alliance

System) battery packs and accessories.

Use only accessories that fulfil the requirements

and specifications listed in these operating

instructions.

8. Cleaning, transporting,

storage

9. Maintenance

10. Troubleshooting Guide

11. Accessories

Metabo FSD 36-18 LTX BL 40 18В, 2 x 5.2 Ач + ASC55 T0519 Инструкция онлайн [18/132] 860775

Похожие устройства