Home
Главная
Worx
Циркулярные (дисковые)
WX437
Инструкция по эксплуатации Страница: 9

Worx WX437 Инструкция по эксплуатации онлайн [9/28] 861033

Compact Circular Saw EN

binding and kickback.

f) Blade depth and bevel adjusting locking

levers must be tight and secure before

making cut. If blade adjustment shifts while

cutting, it may cause binding and kickback.

g) Use extra caution when sawing into existing

walls or other blind areas. The protruding blade

may cut objects that can cause kickback.

SAFETY INSTRUCTIONS FOR

SAWS WITH INNER PENDULUM

GUARD

Lower Guard Function

a) Check lower guard for proper closing

before each use. Do not operate the saw if

lower guard does not move freely and close

instantly. Never clamp or tie the lower guard

into the open position. If saw is accidentally

dropped, lower guard may be bent. Raise the lower

guard with the retracting handle and make sure it

moves freely and does not touch the blade or any

other part, in all angles and depths of cut.

b) Check the operation of the lower guard

spring. If the guard and the spring are not

operating properly, they must be serviced

before use. Lower guard may operate sluggishly

due to damaged parts, gummy deposits, or a build-

up of debris.

c) The lower guard may be retracted manually

only for special cuts such as “plunge cuts”

and “compound cuts.” Raise lower guard by

retracting handle and as soon as blade enters the

material, the lower guard must be released. For

all other sawing, the lower guard should operate

automatically.

d) Always observe that the lower guard is

covering the blade before placing saw down

on bench or floor. An unprotected, coasting blade

will cause the saw to walk backwards, cutting

whatever is in its path. Be aware of the time it takes

for the blade to stop after switch is released.

ADDITIONAL SAFETY RULES

FOR YOUR CUTTINGOFF

MACHINES

CUTOFF MACHINE SAFETY WARNINGS

a) The guard provided with the tool must be

securely attached to the power tool and

positioned for maximum safety, so the least

amount of wheel is exposed towards the

operator. Position yourself and bystanders

away from the plane of the rotating wheel. The

guard helps to protect operator from broken wheel

fragments and accidental contact with wheel.

b) Use only bonded reinforced or diamond cut-off

wheels for your power tool. Just because an

accessory can be attached to your power tool, it does

not assure safe operation.

c) The rated speed of the accessory must be at

least equal to the maximum speed marked on

the power tool. Accessories running faster than

their rated speed can break and fly apart.

d) Wheels must be used only for recommended

applications. For example: do not grind with the

side of cut-off wheel. Abrasive cut-off wheels are

intended for peripheral grinding, side forces applied

to these wheels may cause them to shatter.

e) Always use undamaged wheel flanges that are

of correct diameter for your selected wheel.

Proper wheel flanges support the wheel thus

reducing the possibility of wheel breakage.

f) Do not use worn down reinforced wheels from

larger power tools. Wheels intended for a larger

power tool are not suitable for the higher speed of a

smaller tool and may burst.

g) The outside diameter and the thickness of your

accessory must be within the capacity rating

of your power tool. Incorrectly sized accessories

cannot be adequately guarded or controlled.

h) The arbour size of wheels and flanges must

properly fit the spindle of the power tool. Wheels

and flanges with arbour holes that do not match the

mounting hardware of the power tool will run out of

balance, vibrate excessively and may cause loss of

control.

i) Do not use damaged wheels. Before each use,

inspect the wheels for chips and cracks. If

power tool or wheel is dropped, inspect for

damage or install an undamaged wheel. After

inspecting and installing the wheel, position

yourself and bystanders away from the plane

of the rotating wheel and run the power tool

at maximum no load speed for one minute.

Damaged wheels will normally break apart during

this test time.

j) Wear personal protective equipment.

Depending on application, use face

shield, safety goggles or safety glasses.

As appropriate, wear dust mask, hearing

protectors, gloves and shop apron capable

of stopping small abrasive or workpiece

fragments. The eye protection must be capable

of stopping flying debris generated by various

operations. The dust mask or respirator must be

capable of filtrating particles generated by your

operation. Prolonged exposure to high intensity

noise may cause hearing loss.

k) Keep bystanders a safe distance away from

work area. Anyone entering the work area must

wear personal protective equipment. Fragments

of workpiece or of a broken wheel may fly away and

cause injury beyond immediate area of operation.

Worx WX437 Инструкция по эксплуатации онлайн [9/28] 861033

Похожие устройства