Metabo MT 18 LTX BL QSL 613088800 Инструкция к товару онлайн [12/76] 862851
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Metabo MT 18 LTX BL QSL 613088800 Инструкция к товару онлайн [12/76] 862851

Metabo MT 18 LTX BL QSL 613088800 Инструкция к товару онлайн [12/76] 862851
ENGLISHen
12
Use only accessories that fulfil the requirements
and specifications listed in these operating instruc-
tions.
Battery packs with different capacities:
Best.-Nr.: .................. 625596000 2,0 Ah (LiHD)
Best.-Nr.: .................. 625367000 4,0 Ah (LiHD)
etc.
Chargers: ASC 55, ASC 145, etc.
Best.-Nr.: ..................627044000 ASC 55
Best.-Nr.: ..................627378000 ASC 145
etc.
For a complete range of accessories, see
www.metabo.com or the main catalogue.
Repairs to electrical tools must ONLY be
carried out by qualified electricians!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. See
www.metabo.com for addresses.
You can download a list of spare parts from
www.metabo.com.
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Only for EU countries: Never dispose of
power tools in your household waste! Used
power tools must be collected separately and
handed in for environmentally compatible recycling
in accordance with European Directive 2012/19/EU
on waste electrical and electronic equipment and its
implementation in national legal systems.
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Before disposal, discharge the battery pack in the
power tool. Prevent the contacts from short-circu-
iting (e. g. by protecting them with adhesive tape).
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
U =Voltage of battery pack
s
0
=Oscillating frequency at idle speed
o =Oscillation angle left / right
m =Weight with smallest battery pack
Measured values determined in conformity with EN
62841.
Permitted ambient temperature during operation:
-20 °C (-4°F) to 50 °C (120°F) (limited performance
with temperatures below 0 °C (32°F)). Permitted
ambient temperature for storage: 0 °C (32°F) to
30 °C (86°F).
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on the operating conditions, the
condition of the power tool or the accessories.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user e.g. organisational
measures based on the adjusted estimates.
Vibration total value
(vector sum of three directions)
determined in accordance with EN 62841:
a
h, DS
= Vibration emission value (surface
grinding)
a
h, S
= Vibration emission value (scraping)
a
h, ST
= Vibration emission value (sawing with
plunge cutting saw blade)
a
h, SS
= Vibration emission value (sawing with
segment saw blade)
K
h,...
= Uncertainty (vibration)
Typical A-effective perceived sound levels
:
L
pA
=Sound-pressure level
L
WA
= Acoustic power level
K
pA
, K
WA
= Uncertainty
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
11. Repairs
12. Environmental Protection
13. Technical Specifications

Похожие устройства

Скачать