Rupes SKORPIO E орбитальная 3мм RX 253A RX253A230/H5/DE/STD RH253A_256_259A онлайн [8/33] 863531

TECHNICAL DATA ENGLISH

The safety and accident prevention instructions are reported in

the “SAFETY INSTRUCTION” booklet which forms an integral part

of these documents. This OPERATING INSTRUCTION MANUAL

indicates the additional information required specifically for use

of the tool.

CORRECT USAGE

This tool is designed to be used as a sander. Read all the

warnings, instructions, indications provided on drawings and

specifications supplied with this tool.Failure to comply with all the

instructions provided below may cause serious injuries.

This tool is not intended to be used for metal brushing,polishing

and cutting operations. The use of this tool for unintended

applications may cause hazards and injuries to people.

Do not use accessories that are not specifically designed for the

intended use of the tool or that have not been recommended by

the manufacturer. The fact that an accessory can be fixed to the tool

does not imply that it can be used safely.

The rated speed of the accessory must be at least equivalent to

the maximum speed specified on the tool. Using the accessories at

speeds above the rated one, may cause them to break or be

projected into the air.

The external diameter and thickness of the accessory must match

the specifications of the electrical tool. Accessories with incorrect

dimensions cannot be adequately protected or controlled.

The configuration of accessories must match the tool. The use of

accessories that cannot be perfectly fitted on the tool may result in

imbalance, excessive vibrations and in the impossibility of controlling

the tool.

Do not use damaged accessories. Before use, inspect all the

accessories. Inspect the supporting pads and verify there are no

cracks, tears or excessive wear. If the tool or accessory has fallen,

verify that it is not damaged or install a new accessory. After

inspecting or installing an accessory, move to a safe distance with

any other person present and operate the tool at maximum speed

without load for one minute. Damaged accessories generally break

during this test period

GENERAL WARNINGS

The tool must be connected to a suitable dust extraction system (not supplied).

TYPE RH253 RH256 RH259 RH253A RH256A RH259A

WORKING PRESSURE bar/PSI 6,2/90 6,2/90 6,2/90 6,2/90 6,2/90 6,2/90

AIR CONSUMPTION l/min 320 320 360 320 320 360

SPEED CONTROL YES YES YES YES YES YES

RPM 0 ÷ 11.500 0 ÷ 10.500 0 ÷ 9.500 0 ÷ 11.500 0 ÷ 10.500 0 ÷ 9.500

ORBITAL DIAMETER mm 3 6 9 3 6 9

DISC PAD DIAMETER mm 150 150 150 150 150 150

DISC PAD TYPE VELCRO FACED VELCRO FACED VELCRO FACED VELCRO FACED VELCRO FACED VELCRO FACED

EXTRACTION SYSTEM - - - YES YES YES

WEIGHT Kg 0,750 0,750 0,800 0,750 0,750 0,800

Rupes SKORPIO E орбитальная 3мм RX 253A RX253A230/H5/DE/STD RH253A_256_259A онлайн [8/33] 863531

Похожие устройства