Stiga ST 8051 AE 2S1510201/S16 [22/27] Problem identification
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Stiga ST 8051 AE 2S1510201/S16 [22/27] Problem identification

Stiga ST 8051 AE без акк. и з.у [22/27] Problem identification

Содержание

Похожие устройства

13 PROBLEM IDENTIFICATION PROBLEM 1 No start PROBABLE CAUSE REMEDY Battery is not inserted or is inserted Check that the battery is correctly inserted incorrectly Overload protection activated Wait a few seconds for automatic reset The auger is on and the motor cannot start Immediately release the start control and remove the obstacle Try and switch on again Auger or discharge chute obstructed blocked by obstacles or damaged Clean the auger and chute Remove any dirt or foreign bodies Replace if damaged The capacitor is faulty Call assistance or the dealer 3 The motor stops suddenly Electric part malfunction Call assistance or the dealer Overload protection activated Wait 10 minutes and try again 4 Excessive vibrations Loose parts or auger or rotor damaged Tighten all the fastening devices Replace the damaged parts in the authorised assistance centre Handle not correctly positioned Ensure the handle is fastened in its position Blocked discharge chute Clean the discharge chute Auger blocked Remove any dirt or foreign bodies from the auger 6 The snow thrower leaves a light layer of snow on the ground Auger blade worn Contact the authorised assistance centre 7 Battery power reserve is low Severe working conditions requiring greater Optimise operations chap 7 current absorption 2 The motor barely rotates 5 Loss or slowing of thrown snow Battery is insufficient requirements 8 The battery charger is not recharging the battery red led on or flashing 9 The battery charger is not recharging the battery no led on for operating Use a second battery or an extended battery Battery is not correctly inserted in the Check it is correctly inserted battery charger Unsuitable environmental conditions Recharge the battery in places with suitable temperatures chap 7 Dirty contacts Clean the contacts The battery charger is not energised Check it is plugged in and the power socket is energised Faulty battery charger Replace with an original spare part If problems persist after having performed the above operations contact your dealer EN 12

Скачать