Metabo RTD 18 LTX BL 30 1x18 В, без аккумулятора и зарядного устройства 601720850 Инструкция онлайн [19/128] 864902
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Metabo RTD 18 LTX BL 30 1x18 В, без аккумулятора и зарядного устройства 601720850 Инструкция онлайн [19/128] 864902

Metabo RTD 18 LTX BL 30 1x18 В, без аккумулятора и зарядного устройства 601720850 Инструкция онлайн [19/128] 864902
ENGLISH en
19
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Packaging materials must be disposed of according
to their labelling in accordance with municipal
guidelines. Further information can be found at
www.metabo.com in the “Service” section.
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
Explanatory notes regarding the specifications on
page 4.
Changes due to technological progress reserved.
U=voltage
B=cutting width
H = max. cutting line length
H
X
= cutting line diameter
n
0
= No-load speed
m = weight (with the smallest battery pack)
Measured values determined in conformity with
EN 62841-4-4; 2000/14/EC.
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C). Permitted ambient
temperature for storage: 0 °C to 30 °C
Recommended ambient temperature when
charging: 0 °C to 40 °C
direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value
(vector sum of three
directions):
a
h
= vibration emission value
K
h
= uncertainty (vibration)
Typical A-weighted sound levels:
L
pA
= sound-pressure level
L
WA
=Acoustic power level
K
pA
, K
WA
= Uncertainty
L
WA(G)
= Guaranteed acoustic power level as per
2000/14/EC
Wear ear protectors!
13. Environmental Protection
14. Technical Specifications

Похожие устройства

Скачать