Hilti SIW 22T-A 1/2 409460 Инструкция к товару онлайн [13/192] 865085

*409099*

409099 English 7

5 Operation

5.1 Preparations at the workplace

5.1.1 Charging the battery

1. Before charging the battery, read the operating instructions for the charger.

2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.

3. Use an approved charger to charge the battery.

5.1.2 Inserting the battery

CAUTION

Risk of injury by short circuit or falling battery!

▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product

are free of foreign matter.

▶ Make sure that the battery always engages correctly.

1. Charge the battery fully before using it for the first time.

2. Push the battery into the battery holder until it engages with an audible click.

3. Check that the battery is seated securely.

5.1.3 Removing the battery

1. Press the battery release buttons.

2. Remove the battery from the tool.

5.1.4 Fitting the belt hook (optional) 2

WARNING

Risk of injury! Hazard presented by a falling power tool.

▶ A falling power tool may present a risk of injury to yourself and others. Check that the belt hook is fitted

securely before beginning work.

The belt hook allows the power tool to be attached to a belt worn by the operator. The belt hook can

be fitted to allow attachment on the left or right side of the body.

1. Disconnect the battery from the tool.

2. Fit the mounting plate into the guides provided.

3. Use the 2 screws to attach the belt hook and make sure that the screws are driven fully (countersunk

head flush).

5.1.5 Setting forward or reverse rotation 3

In the middle position, the forward / reverse selector switch serves as a safety lock.

▶ Set the forward / reverse selector switch to forward or reverse rotation.

5.1.6 Installing an accessory tool 4

SIW 22T-A

CAUTION

Risk of injury through use of the wrong type of accessory tool!

▶ Use only accessory tools of the locking type.

▶ Do not use worn or damaged accessory tools.

1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.

2. Line up the hole in the accessory tool with the half ball in the square drive spindle.

3. Push the accessory tool on to the product's square drive spindle.

▶ The accessory tool snaps into engagement.