Makita XGT BL TW007GD201 Инструкция к товару онлайн [11/40] 865191

11 ENGLISH

Changing the application mode

Changing the impact force

You can change the impact force in four steps: 4 (max), 3 (hard), 2 (medium), and 1 (soft).

This allows a tightening suitable to the work.

The level of the impact force changes every time you press the button .

You can change the impact force within approximately one minute after releasing the switch trigger.

NOTE: You can extend the time to change the impact force approximately one minute if you press the but-

ton

or .

►Fig.7

Application mode

(Impact force grade displayed on panel)

Maximum blows Purpose

4 (Max)

2,900 min

-1

(/min) Tightening with the maximum force and speed.

Tightening when the force and the speed are desired.

3 (Hard)

2,700 min

-1

(/min) Tightening with less force and speed than Max mode

(easier to control than Max mode).

Tightening when the force and the speed are desired.

2 (Medium)

1,900 min

-1

(/min) Tighteningwhenagoodnishingisneeded.

Tightening when you need good control power.

1 (Soft)

1,200 min

-1

(/min) Tightening with less force to avoid screw thread breakage.

Tighteningwhenyouneedneadjustmentwithsmall

diameter bolts.

: The lamp is on.

NOTE: When none of the lamp on the panel is lit, pull the switch trigger once before pressing the button

NOTE:Alllampsontheswitchpanelgooutwhenthetoolisturnedo󰀨tosavethebatterypower.Theimpactforce

grade can be checked by pulling the switch trigger to the extent that the tool does not operate.