Home
Главная
Makita
Аккумуляторные
XGT BL TW007GD201
Инструкция к товару Страница: 13

Makita XGT BL TW007GD201 Инструкция к товару онлайн [13/40] 865191

13 ENGLISH

ASSEMBLY

CAUTION: Always be sure that the tool is

switched o󰀨 and the battery cartridge is removed

before carrying out any work on the tool.

Selecting correct impact socket

Always use the correct size impact socket for bolts and

nuts. An incorrect size impact socket will result in inac-

curate and inconsistent fastening torque and/or damage

to the bolt or nut.

Installing or removing impact socket

Optional accessory

CAUTION: Make sure that the impact socket

and the mounting portion are not damaged before

installing the impact socket.

CAUTION: After inserting the impact socket,

make sure that it is rmly secured. If it comes out,

do not use it.

NOTE: The way of impact socket installation varies

depending on the type of the square drive on the tool.

Tool with the ring spring

Model TW007G

For impact socket without O-ring and pin

►Fig.10: 1. Impact socket 2. Square drive 3. Ring

spring

Push the impact socket onto the square drive until it

locks into place.

Toremovetheimpactsocket,simplypullito󰀨.

For impact socket with O-ring and pin

►Fig.11: 1. Impact socket 2. O-ring 3. Pin

Move the O-ring out of the groove in the impact socket

and remove the pin from the impact socket. Fit the

impact socket onto the square drive so that the hole in

the impact socket is aligned with the hole in the square

drive.

Insert the pin through the hole in the impact socket and

square drive. Then return the O-ring to the original posi-

tion in the impact socket groove to retain the pin.

To remove the impact socket, follow the installation

procedures in reverse.

Tool with the detent pin

Model TW008G

For tool with light t detent pin

►Fig.12: 1. Impact socket 2. Hole 3. Square drive

4. Detent pin

To install the socket, align the hole in the side of the

socket with the detent pin on the square drive, and then,

push it onto the square drive until it locks into place. Tap

it lightly if required.

Toremovethesocket,simplypullito󰀨.

For tool with rm t detent pin

Optional accessory

►Fig.13: 1. Impact socket 2. Hole 3. Square drive

4. Detent pin

To install the socket, align the hole in the side of the

socket with the detent pin on the square drive, and then,

push it onto the square drive until it locks into place. Tap

it lightly if required.

To remove the socket, depress the detent pin through the

holeinthesocketandpullthesocketo󰀨thesquaredrive.

NOTE:Thermtdetentpinmayttoosecurelyto

remove the socket.

Inthatcase,depressthermtdetentpinfullyand

pullthesocketo󰀨thesquaredrive.

Installing hook

CAUTION: When installing the hook, always

secure it with the screw rmly. If not, the hook

maycomeo󰀨fromthetoolandresultinthepersonal

injury.

►Fig.14: 1. Groove 2. Hook 3. Screw

The hook is convenient for temporarily hanging the tool. This can

be installed on either side of the tool. To install the hook, insert it

into a groove in the tool housing on either side and then secure it

with a screw. To remove, loosen the screw and then take it out.

Ring

Country specic

CAUTION: Before using the ring, always

make sure that the bracket and ring are secured

and not damaged.

CAUTION: Use the hanging/mounting parts

for their intended purposes only. Using for unin-

tended purpose may cause accident or personal

injury.

►Fig.15: 1. Bracket 2. Ring 3. Screws

The ring is convenient for hanging the tool with hoist.

First, place the rope through the ring. Then hang the

tool up to the air with hoist.

OPERATION

CAUTION: Always insert the battery cartridge

all the way until it locks in place. If you can see the

red indicator, it is not locked completely. Insert it fully

until the red indicator cannot be seen. If not, it may

accidentallyfalloutofthetool,causinginjurytoyou

or someone around you.

►Fig.16

Holdthetoolrmlyandplacetheimpactsocketovertheboltor

nut. Turn the tool on and fasten for the proper fastening time.

Theproperfasteningtorquemaydi󰀨erdependingupon

the kind or size of the bolt, the material of the workpiece

to be fastened, etc. The relation between fastening

torqueandfasteningtimeisshowninthegures.

Makita XGT BL TW007GD201 Инструкция к товару онлайн [13/40] 865191

Похожие устройства