Verto 15G751 15G751 онлайн [6/24] 865706
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Verto 15G751 15G751 онлайн [6/24] 865706

Verto 15G751 15G751 онлайн [6/24] 865706
6
HOW TO SET UP WATERING DURATION
Once the "HOW LONG" option is selected (g. 3), set up watering
duration. Maximum watering duration is 360 minutes. Set up the
duration with the adjustment buttons (3) and accept with the selection
button (4). Accept the setting with the selection button (4), the device
will move on to option "HOW OFTEN".
Fig. 3
HOW TO SET UP WATERING FREQUENCY
Available watering frequency settings are: 1 hour, 2 hours, 4 hours, 6
hours, 8 hours, 12 hours, 1 day and up to 7 days. Use the "HOW OFTEN"
option and the adjustment buttons (3) to set up watering frequency,
then accept with the button (4). When you accept the setting with the
selection button (4) the device will move on to the "AUTO" option.
Fig. 4
AUTO FEATURE
Current time and watering start time will be displayed alternately (the
display changes data every 5 seconds) (fig. 5a).
Fig. 5a
Caution: when the subsequent watering time exceeds 24 hours, the
display indicates it as a day (g. 5b).
Fig. 5b
HOW TO SWITCH OFF THE TIMER
To switch the timer off, use the selection button (4) to select "OFF"
(fig. 6).
Fig. 6
WATERING DELAY
You can set up watering delay (e.g. in case of rain). Select "AUTO" feature,
then use the adjustment buttons (3) to set up the watering delay time
(the display will show "DELAY" message, fig. 7a). Possible delay time
settings are: 12 hours, from 1 day up to 7 days.
Fig. 7a
After setting up required delay time wait for 3 seconds until it stops
blinking. Once the delay time is set, the display will show current time
and delay time (fig. 7b) (the display changes over every 5 seconds).
Fig. 7b
MANUAL SETTINGS
"AUTO" and "OFF" options offer additional feature of manual settings.
Press the manual settings button (2) to access this feature. The display
will show available selection of watering duration setting (g. 8).
Watering duration can be defined from the range 0–360 minutes. After
8 seconds the duration will stop blinking and the valve will open. The
valve will remain open for previously defined watering duration.
Fig. 8
RESET
Press and hold the selection button (4) for 7 seconds to reset the timer
(g. 9). The timer will return to factory settings.
Previous settings will be cleared, and all timer options will require
configuring again.
Fig. 9
MAINTENANCE
1. The timer is designed for outdoor use.
2. Do not leave the timer outdoors when the temperature falls below
0°C.
3. When the timer is not in use:
a. Remove the timer from the tap.
b. Use manual settings to open the timer valve, this allows to drain
water residues from the device. Wipe dry.
c. Remove batteries.
d. Store in a warm and dry place.

Похожие устройства

Скачать