Kospel 4 кВт EPO.D-4 [16/32] Installation assembly

Installation – Assembly

1. Bring the water system pipes and electric

supplycables(observingbindingnorms)to

theplacewheretheunitwillbetted.

2. Take off theunit’scover: undothe screws,

slidethecoveroffstartingfromtheinletand

outletside.

3. Fixtheunit.

4. Connect(e.g.usingexiblehoses)coldwater

totheinletpipeinsertingalterinbetween

andconnecthotwatertotheoutletpipe.

5. Openthecoldwatervalveandcheckforleaks.

6. Theunitisfactoryadjustedtoconnecttosin-

glephasesupply(it’sequippedwithabridge

connectingterminalclampsUandV).

7. Ifthe unit is connected to twophasessup-

ply,thefactorymountedbridge(connecting

terminalclampsUandV)hastobetakenoff.

8. Puttheunit’scoverback.

9. Makesurethatthereisnoaccesstoliveparts

throughtheholesatthebackplate.

EPO.G – must be installed with

the outlet and inlet pipes at the

bottom

EPO.D – must be installed with

the outlet and inlet pipes at the

top