Oleo-Mac 40V GI 40 P несамоходная с аккумулятором и зарядным устройством 5414-9001S1 Инструкция к газонокосилке онлайн [49/274] 867939

17 TROUBLESHOOTING

WARNING

• Always stop the machine and disconnect the spark plug before performing all

the corrective tests recommended in the table below, except in cases where

machine operation is explicitly requested.

• Always stop the machine and disconnect the battery before performing all the

corrective tests recommended in the table below, except in cases where machine

operation is explicitly requested.

• When all possible causes have been checked and the problem is not resolved,

consult an Authorized Service Center. If a problem occurs that is not listed in this

table, consult an Authorized Service Center.

PROBLEM POSSIBLE CAUSES SOLUTION

The engine does not start or

turns off only a few seconds

after starting.

Battery drained or not

properly inserted (only on

models equipped with this

feature)

Charge the battery or fit it correctly.

Damaged power cord.

Have the power cord replaced at an

Authorized Service Center.

Motor protection triggered

due to overheated engine.

Wait a few minutes before repeating

the starting procedure

Safety key not inserted.

Check and/or insert.

Starting lever microswitch

damaged

Contact an Authorized Service

Center.

Damaged battery.

Contact an Authorized Service

Center.

The engine starts and runs,

but the blade does not rotate.

WARNING: Never touch the

blade while the motor is

running.

Turn off engine immediately and

contact an Authorized Service Center.