McCulloch M46-110R 9676216-01 [66/392] Assembly of the catcher

McCulloch M46-110R 9676216-01 [66/392] Assembly of the catcher
ASSEMBLING AND ADJUSTMENTS
66English
General
Handle
Assembly
Top handle
Place the handlebar’s tubular construction in direct
opposite to the lower part of the handlebar. Tighten the
knobs properly.
Use enclosed straps to secure cables to the handle. Do
not overstretch cables when mounting.
Cutting height
Move the lever to the back for higher cutting height and to
the front for lower cutting height.
Catcher
Assembly of the catcher
Place the frame into the fabric collector.
The collector’s handle situated on the frame must be
placed over the collector bag.
Secure the frame by using the quick-action clips.
Attach the hooks in the upper edge of the chassis. Fit
the bagger bottom in the discharge hole.
Mulch plug
Optional mulch kit accessory required to be ordered on
M46- models (kit PNC 579679201) and M51- models (kit
PNC=579679301). No kit available for M40 models.
Raise the discharge guard to mount / dismount the
mulch plug.
Filling with oil
The oil tank is empty at delivery. Fill the oil slowly. See
instructions under the heading Maintenance. The
engine oil should be changed according to the engine
manual.
!
IMPORTANT! Prevent unintentional
starting by removing the ignition cable
from the spark plug.
NOTICE! Do not set the cutting height too low as there
is a risk that the cutters might hit ground with
unevenness.

Содержание

Похожие устройства

ASSEMBLING AND ADJUSTMENTS General IMPORTANT Prevent unintentional starting by removing the Ignition cable from the spark plug Catcher Assembly of the catcher Handle Assembly Top handle Place the handlebar s tubular construction in direct opposite to the lower part of the handlebar Tighten the knobs properly Place the frame into the fabric collector The collector s handle situated on the frame must be placed over the collector bag Secure the frame by using the quick action clips Attach the hooks in the upper edge of the chassis Fit the bagger bottom in the discharge hole Mulch plug Optional mulch kit accessory required to be ordered on M46 models kit PNC 579679201 and M51 models kit PN 0 579679301 No kit available for M40 models Raise the discharge guard to mount dismount the mulch plug Cutting height NOTICE Do not set the cutting height too low as there is a risk that the cutters might hit ground with unevenness Move the lever to the back for higher cutting height and to the front for lower cutting height 66 English Filling with oil The oil tank is empty at delivery Fill the oil slowly See instructions under the heading Maintenance The engine oil should be changed according to the engine manual

Скачать