Centek 87 л (26л/61л) 475x495x852 мм (ДхШхВ), 80 Вт GMCC, 2 полки, 42 dB, A+ CT-1704 Инструкция онлайн [26/32] 870471

damage the refrigerant circulation tubes on the back of the

refrigerator.

– This product contains a small amount of refrigerant, which is

isobutane, a natural gas that does not harm the environment,

but is flammable. When transporting and installing the

refrigerator, care must be taken not to damage any parts of the

refrigerant circuit.

– Coming out of the tubes, the refrigerant can ignite or harm your

health. If damage to the refrigerant circuit does occur, avoid any

kind of open fire or potential sources of ignition, and ventilate

the room where the refrigerator is located for a few minutes.

– In order to avoid the formation of a flammable mixture of gas

and air in the event of a refrigerant leak, the dimensions of the

room where the refrigerator is located must correspond to the

amount of refrigerant used in the refrigerator.

– The volume of the room should be 1 m3 for every 8 g of

refrigerant R600a in the refrigerator. The amount of refrigerant

contained in your particular refrigerator is indicated on the

nameplate on the back of the refrigerator.

– Never turn on the refrigerator with signs of damage. If you have

any doubts about the serviceability of the product, contact

customer service.

2. PACKAGE CONTENTS

– Refrigerator - 1 pc.

– User Manual - 1 pc.

– Glass shelf - 2 pcs.

– Door shelf - 3 pcs.

– Ice cube mold - 1 pc.

– Ice scraper - 1 pc.

– Egg tray - 1 pc.

– Vegetable storage container - 1 pc.

APPLIANCE DESCRIPTION

1. Freezer chamber

2. Temperature regulator

3. Glass shelves

4. Vegetable storage container

5. Adjustable feet

6. Door shelves

3. REFRIGERATOR TRANSPORTATION

When transporting or carrying the device, hold it by the bottom

and carry it in an upright position. Do not tilt the refrigerator more

than 450 degrees. Never turn it upside down. Do not place the

appliance on the sides or back. Do not transport the device if it is

lying on its side, on the back or on the front sides. Do not use the

door as a carrying aid. This can disable the device. The two rear

legs of the refrigerator are equipped with rollers. To move around

the kitchen and accurately install the appliance in place, tilt the

refrigerator slightly in the direction of the back wall and move it.

The two front legs of the refrigerator can be adjusted in height. In

order to align the device precisely, twist the front legs to the left

or right so that the device is securely on the floor.

After transporting and installing the refrigerator, wait about

three hours before connecting it to the mains to be sure that the

refrigerant has been properly distributed after transportation -

this is necessary for the refrigerator to work properly.

4. INSTALLING THE REFRIGERATOR

Proper installation is necessary to ensure reliable and efficient

operation of the refrigerator. It is necessary to lift the refrigerator

by holding it by the bottom. Do not pull on the door or handle.

The manufacturer’s warranty does not cover damage to the

door as a result of its rearrangement. Repairs caused by such

circumstances will be carried out at the expense of the owner.

OVERHANGING DOORS

ATTENTION!

For rearranging the door, it is recommended to contact a qualified

specialist. If you decide to reinstall the refrigerator door yourself,

use the recommendations listed below in this manual.

Tools required: Philips screwdriver, flat screwdriver, Allen key.

– Disconnect the refrigerator from power supply.

– Remove all food from the refrigeration chamber.

– Tilt the refrigerator.

– Remove the refrigerator’s feet.

– Unscrew the bolts fastening the lower hinges (Fig. 1).

– Remove the door from the refrigerator.

– Unscrew the bolts and remove the middle hinges and the

freezer chamber door.

– Remove the upper hinge support.

– Reinstall the supports to the opposite side.

– Reinstall the hinge supports to the other side (Fig. 2).

– Reinstall the freezer chamber door.

– Install the middle hinge.

– Reinstall the refrigerator door.

– Install the lower hinge.

– Reinstall the bottom feet.

Figure 1

Figure 2

Figure 3

Middle loop

VENTILATION

The compressor and condenser of the refrigerator heat up during

operation, so it is necessary to provide sufficient ventilation to

the device.

– The refrigerator should be installed in a well-ventilated room

with normal humidity. It is forbidden to install a refrigerator

in rooms with high humidity, for example, in bathrooms,

basements.

– When installing, ensure minimum gaps (3-5 cm) on the sides of

the device and 10 cm on top for free air circulation. Do not block

the air movement at the back of the appliance.

– Do not place near heat sources.

– Do not place the refrigerator in direct sunlight or near heat

sources (kitchen stoves, ovens, fireplaces).

ALIGNMENT

For the efficient operation of the refrigerator, it is important that

it is on a flat surface. After installing the refrigerator in place,

adjust its position by rotating the adjustment supports in its front

part. The tilt of the refrigerator back should not exceed 5°.

CONNECTION TO THE POWER SUPPLY

The refrigerator corresponds to the 1st class of protection against

electric shock and is connected to the electrical supply using a

two-pole outlet with a grounding contact.

Centek 87 л (26л/61л) 475x495x852 мм (ДхШхВ), 80 Вт GMCC, 2 полки, 42 dB, A+ CT-1704 Инструкция онлайн [26/32] 870471

Похожие устройства