D-Link с портами ps2/usb KVM-450/C1A Краткое руководство по установке онлайн [3/8] 870731

KVM-450

ENGLISH

The KVM-450 features the buttons located on the front panel to switch quickly and easily between

your computers. You can also use the included IR remote controller to switch between your

Switching with the KVM-450

Note: Don't switch PC without finishing PC boot-up.

computers.

Troubleshooting

1. WHEN TURNING THE COMPUTER ON, THE KEYBOARD IS NOT DETECTED, OR A

KEYBOARD / MOUSE ERROR MESSAGE IS DISPLAYED.

If the computer's BIOS does not support USB boot-up, the system may be unable to detect the

mouse and keyboard during startup. Please ensure that your PC BIOS supports USB boot-up,

and upgrade your PC's rmware if necessary.

2. THE COMPUTER'S BIOS IS CORRECTLY CONFIGURED BUT THE COMPUTER IS STILL

UNABLE TO DETECT THE MOUSE AND KEYBOARD.

Be sure to directly connect the USB KVM switch to USB port on the PC's motherboard rather than

through a port on a PCI card, Card Bus, or USB Hub.

THE IMAGE ON MY MONITOR IS NOT CLEAR.

Check the following:

- Verify that all video monitor cables are inserted properly.

- Try lowering the resolution and refresh rate of your monitor.

- Try using a shorter video cable.

- Try rescanning for VGA signal from monitor again.

Verify that the keyboard/mouse works when plugged into the computer directly. You will have to

shutdown your computer first to do this. Otherwise, try to use another keyboard/mouse (use

a keyboard only with 101, 102 or 104 keys).