Home
Главная
Karcher
Пароочиститель
SC 3 EasyFix AE *EU (1.513-660.0)
Руководство по эксплуатации Страница: 16

Karcher SC 3 EasyFix AE *EU (1.513-660.0) Руководство по эксплуатации онлайн [16/188] 874465

16 English

Set the device to the current water hardness before us-

ing it in an area with a different water hardness (e.g. af-

ter a move).

Note

Your water board or municipal utilities authority can pro-

vide information on hardness of tap water.

The water hardness is set using the RESET button. The

water hardness setting is stored until a new setting (e.g.

after a move) is made. The device is set to the highest

water hardness (level IV) in the factory. The device indi-

cates the set water hardness with flash pulses.

Water hardness levels and flash pulses

Note

The anti-calcification effect of the decalcification car-

tridge is activated as soon as the device is filled with wa-

ter and put into operation. Lime in the water is absorbed

by the granulate in the decalcification cartridge. Addi-

tional descaling is not required.

Note

The granulate in the cartridge can discolour on contact

with water due to the mineral content in the water, which

is no cause for concern and has no negative effects on

the device, cleaning work or the functionality of the car-

tridge.

Note

Do not pause for longer than 15 seconds when setting

as the device will otherwise be set automatically to the

last selected water hardness or the highest water hard-

ness set during initial start-up.

1. Connect the mains plug.

2. Make sure that the device is switched off.

3. Press the RESET button and hold it while the device

is switched on.

Illustration G

After approximately 2 seconds, the indicator light

flashes and signals the current water hardness set-

ting with the number of pulses.

4. Press the RESET key repeatedly to change the wa-

ter hardness level.

Note

When the RESET key is pressed, the flash pulse for the

water hardness level is not indicated.

5. Release the RESET key.

The flash pulse for the set water hardness is indicat-

ed.

6. Repeat the process as necessary until the desired

water hardness level has been achieved.

7. Press and hold the RESET key for 3 seconds to

save the setting for the water hardness level.

The indicator light for the water hardness lights up.

Care of accessories

(Accessories - depending on scope of delivery)

Note

The micro fibre cloths are not suitable for dryer.

Note

For optimum cleaning performance, we recommend

machine washing the cloths once before first use.

When washing, observe the notes on the washing tag.

Do not use any liquid softeners as this will affect the abil-

ity of the cloths to pick up dirt.

1. Wash the floor cleaning cloths and covers at a max.

temperature of 60 °C in the washing machine.

Troubleshooting guide

Malfunctions often have simple causes that you can

remedy yourself using the following overview. When in

doubt, or in the case of malfunctions not mentioned

here, please contact your authorised Customer Service.

몇 WARNING

Risk of electric shock and burns

Trying to eliminate faults while the appliance is connect-

ed to the mains or has not yet cooled down is always

dangerous.

Remove the mains plug.

Allow the appliance to cool down.

The water shortage indicator light flashes red

The dry-run protection for the pump is deactivated.

1. Switch the device off and back on again.

2. Make sure that the decalcification cartridge has

been inserted correctly and there is sufficient water

in the reservoir.

The water shortage indicator light lights up con-

stantly in red

No water in the water reservoir.

1. Top up the water reservoir, see chapter Topping up

the water.

The steam lever cannot be pressed

The steam lever is locked with the child lock.

 Set the child lock (selector switch for steam volume)

to the front.

The steam lever is released.

No / little steam although there is water in the reser-

voir

The decalcification cartridge has not been inserted or

has been inserted incorrectly.

 Insert the decalcification cartridge or insert it cor-

rectly.

The decalcification cartridge has been removed while

topping up the water.

 Leave the decalcification cartridge in the device

when topping up.

New decalcification cartridge has been inserted.

 Press and hold the steam lever constantly.

The full steam output is reached after approximately

30 seconds.

Red indicator light "replace descaling cartridge"

lights up / flashes

Run time of the decalcification cartridge ends soon.

 Insert the new decalcification cartridge and reset the

maintenance indicator, see chapter Replacing the

decalcification cartridge.

The RESET key was not pressed after replacement of

the decalcification cartridge.

 Press and hold the RESET key for 4 seconds after

inserting the decalcification cartridge, see chapter

Replacing the decalcification cartridge.

Device switches off automatically

Run time for the decalcification cartridge has expired

 Insert the new decalcification cartridge and reset the

maintenance indicator, see chapter Replacing the

decalcification cartridge.

Hardness

range

°dH mmol/l Number

of flash

pulses

Interval

between

flash

pulses

I soft 0-7 0-1.3 1x 4 seconds

II Medium 7-14 1.3-2.5 2x

III Hard 14-21 2.5-3.8 3x

IV Very

hard

>21 >3.8 4x

Karcher SC 3 EasyFix AE *EU (1.513-660.0) Руководство по эксплуатации онлайн [16/188] 874465

Похожие устройства