Bosch POP7C2O12O Руководство по эксплуатации онлайн [8/44] 875685
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bosch POP7C2O12O Руководство по эксплуатации онлайн [8/44] 875685

Bosch POP7C2O12O Руководство по эксплуатации онлайн [8/44] 875685
en Operating the hotplate
8
7.2 Precleaning burner lids and burner cups
1.
Clean the burner lids (1) and the burner cups (2)
using water and washing-up liquid. Carefully dry the
individual parts.
2.
Place the burner cups and the burner lids on the
burner plate (5). Ensure that the igniter (3) and the
flame safety pin (4) are not damaged.
3.
Keep the nozzle (6) dry and clean. Ensure that the
burner lid is positioned precisely in the centre on
the burner cup.
1
2
3
4 5
6
Operating the hotplate
8  Operating the hotplate
O
p
-
e
r
-
a
t
-
i
n
g
t
h
e
h
o
t
-
p
l
a
t
e
You can find out everything you need to know about
operating your hotplate here.
8.1 Important information about the gas hob
Follow these instructions when using your gas hob.
¡ A slight whistling when operating the burner is nor-
mal.
¡ Odour formation during the first uses is normal. This
does not indicate a risk or malfunction. It will stop
after a while.
¡ An orange flame is normal. This is caused by dust
in the air, overflowing liquids, etc.
¡ If the burner's flame accidentally goes out, switch off
the burner's selector and wait at least 1 minute be-
fore igniting the burner again.
¡ A few seconds after switching off the hob, you may
hear noises, such as a slight clicking, from the
burner. This is not unusual, but shows that the pilot
is deactivated.
¡ Keep the ignition plugs clean. If the ignition plugs
are dirty, the igniter is damaged. Clean the ignition
plugs regularly with a small, metal-free brush. En-
sure that the ignition plugs are not exposed to any
heavy knocks.
8.2 Operating the hotplate
You can ignite the gas burner as follows.
WARNING‒Risk of fire!
Escaping gas may ignite.
▶ If the burner does not ignite after 15seconds, turn
the control knob to the "Off" position and open the
door or window in the room. Do not attempt to re-ig-
nite the burner for at least one minute.
▶ In the event of the burner flames being accidentally
extinguished, turn off the burner control. Do not at-
tempt to re-ignite the burner for at least one minute.
ATTENTION!
The burner may not ignite or the burner flame is not
even.
▶ Ensure that the hotplate burners are clean and dry.
▶ The burner cup and burner cover must be in exactly
the right position.
The burner may go out accidentally.
▶ If the burner's flame accidentally goes out, switch off
the burner's selector and wait at least one minute
before igniting the burner again.
1.
Place suitable cookware on the pan support.
2.
Push in the control knob for the desired burner and
turn it to the large flame position ⁠.
a The ignition process starts.
3.
Press the switch for the hob inwards and hold it
there for 3-5 seconds.
a The gas starts to flow out and burns with the help of
the gas burner.
a This activates the safety pilot. If the gas flame goes
out, the gas leak is automatically shut off by the
safety pilot.
4.
Set the desired flame size.
The flame is not stable between settings Off and .
You must therefore always choose a position
between the large flame and small flame.

Похожие устройства

Скачать