Zalman CNPS9500 AM2 [6/7] Fan mate 2 installation and usage

※

The specifications of any product may change without prior notice to improve performance.

10. FAN MATE 2 Installation and Usage

11. Notes on Usage

11))

Installing FAN MATE 2 inside the System

22))

Installing FAN MATE 2 outside the System

Connect the appropriate 3-pin connector on the

cable to the CPU Fan Header and to the

CNPS9500’s Fan Connector.

Pull the 6-pin Connector out of the system and

connect it to FAN MATE 2, which can be

attached to the case with the Double-Sided Tape.

Control Knob

Fan Connector

(CNPS9500)

Motherboard

CPU Fan Header

Double - sided Tape

FAN MATE 2

6-Pin Connector

◆

Fan speed is controlled by adjusting the control knob. When the control knob on FAN MATE 2 is

turned fully counter-clockwise, the fan operates in Silent Mode. Turned fully clockwise, it operates in

Normal Mode.

Note) FAN MATE 2 has been specifically designed for the fan of this product. Zalman Tech Co., Ltd.

is not responsible for any damage to systems or CPUs caused by its use with other types of fans.

1) Checking CPU Compatibility

Please refer to “Compatible CPUs” on page 2 to confirm that your CPU is compatible before using

the CPU cooler.

2) Cautions During Booting

When booting the computer, it may automatically power down after an alarm sound is set off by a

system monitoring program. This indicates that the CPU fan is rotating slowly. If this happens, turn the

Control Knob fully clockwise to increase the fan speed. Then set ‘CPU Fan Detected’ to

‘Disabled’ in BIOS settings, or set the slowest rotational speed of the CPU fan in the system monitoring

program to less than or equal to 1300rpm.

Note) Some motherboards do not boot if the rotational speed of the CPU fan is below a certain rpm.

If the BIOS settings are updated, Silent Mode can be used. For more information on updating your

BIOS, please refer to the motherboard manufacturer's website. Disabling CPU fan speed detection

in BIOS settings does not affect computing performance.

3) OVERCLOCKING

Zalman Tech Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING.