Home
Главная
NAVEE
Электросамокаты
V40
Руководство по эксплуатации Страница: 13

NAVEE V40 Руководство по эксплуатации онлайн [13/32] 877773

21 22

EN EN

Maintaining the scooter regularly can help keep the scooter neat and in good condition, avoid safety hazards,

minimize breakdowns, slow down the deterioration of the scooter, and extend the scooter's service life.

Scooter Maintenance Schedule (Recommended):

Item

Service

Object

Actions

Every

month

Every 3

months

Every 500 km/

6 months

Every 1000 km/

1 year

Every 10000 km/

3 years

Tires

Tire Pressure

Inflate the tire until its

pressure reaches

45-50 psi.

√ √ √ √

Tire Tread

Wear

Check whether the tire is

cracked, deformed, worn,

etc.

√ √ √

Screws

Handlebar

Assembly

Screws

Tighten the screw that

connects the handlebar

assembly with the stem

assembly (with the

recommended torque of

4.8 ± 0.2 N·m).

√ √ √ √

Tighten the accelerator

screw (with the

recommended torque of

1.6 ± 0.1 N·m).

√ √

Tighten the brake

lever screw (with the

recommended torque of

5 ± 0.2 N·m).

Disc Brake

Caliper

Tighten the screw that

fixes the disc brake caliper

(with the recommended

torque of 3.5 ± 0.5 N·m).

√ √ √

Inflate the Tire

Check the tire pressure every month, and inflate the

tires if the pressure is too low. The recommended tire

pressure is 45-50 psi.

If there is a lack of air in the front and rear tires, you

may use the extended nozzle supplied with the scooter

to inflate tires. First connect the extension nozzle

with air pump, then unscrew the front (rear) tire valve

cap, and connect the extension nozzle and the valve

securely together, then Inflate the tire.

WARNING! Tire removal is very complicated. Please do

not remove the tire by yourself. Improper operation

may aect the operation of the scooter. Please contact

professional support.

Adjust the Disc Brake

Tool: 4 mm hex key (the tool needs to be prepared by

the user).

Before adjusting, make sure the scooter is turned o

and not being charged. During adjusting, pull the end

of the brake cable to make the cable tight.

Note: If the brake is too tight, use the tool to loosen the

screw by turning it counterclockwise, pull the disc brake

rocker arm outwards, and then tighten the screw. If the

brake is too loose, use the tool to loosen the screw by

turning it counterclockwise, push the disc brake rocker

arm forwards, and then tighten the screw.

WARNING !

As with any mechanical component, a vehicle is subject to high stresses and wear. The various

materials and components may react dierently to wear or fatigue. If the expected service life for a component

has been exceeded, it may break suddenly, therefore risking causing injuries to the user. Cracks, scratches and

discoloration in the areas subject to high stresses indicate that the component has exceeded its service life and

please contact an authorized or a specialized repairer.

Valve Cap

Disc Brake Rocker Arm

Adjusting Screw

NAVEE V40 Руководство по эксплуатации онлайн [13/32] 877773

Похожие устройства