Home
Главная
Dreame
Пылесосы вертикальные
Cordless Vacuum Cleaner Z20
Руководство по эксплуатации Страница: 20

Dreame Cordless Vacuum Cleaner Z20 Руководство по эксплуатации онлайн [20/165] 881339

Dreame Cordless Vacuum Cleaner Z20 Руководство по эксплуатации онлайн [20/165] 881339

6

EN

Cleaning the Vacuum

Wipe the vacuum with a soft dry cloth.

Cleaning the Dust Cup, Pre-

Filter, and Cyclone Assembly

1. Press the dust cup bottom cover release

button, then empty the contents.

Cleaning the Filter

1. Remove the dust cup as shown in the

󶀄gure.

Fig. F-5

Cleaning the Illumination

Omni-Brush

Cleaning the Motorized Mini-

Brush

1. Turn the lock counterclockwise until it

stops, then remove the roller from the

roller brush.

1. Use a coin as illustrated to rotate the

lock counterclockwise until you hear a

click. After unlocking the motorized mini-

brush, remove the brush roller.

2. Rinse and clean the brush roller. Stand

the brush roller upright in a well-ventilated

area for at least 24 hours until it is fully dry.

3. Once the brush roller is dry, reinstall it by

following the disassembly steps in reverse.

2. Use scissors to cut o󶀃 the hairs and

󶀄bers that get stuck on the brushroller.

Wipe the dust from the notch, the sealing

strips on both sides and the transparent

cover with a dry cloth or paper towel.

Fig. F-9

Fig. F-10

3. When thebrushroller is dirty, rinse it

with clean water until it is clean. Then

stand the brushroller upright for at least

24 hours until it is fully dry.

Fig. F-11

4. Once the brush roller is dry, reinstall it by

following the disassembly steps in reverse.

Fig. F-12

Fig. F-13

Fig. F-14

Fig. F-15

2. Remove the 󶀄lter from the vacuum by

pulling it down in the direction shown in

the 󶀄gure.

Fig. F-6

3. Rinse the 󶀄lter with rotating it 360° .

Lightly tap the 󶀄lter several times to

remove any debris caught in it.

Fig. F-7

4. Allow the 󶀄lter to air dry for 24 hours.

Fig. F-8

Fig. F-1

2. Press the dust cup release button and

remove it from the vacuum.

Fig. F-2

3. Remove the pre-󶀄lter 󶀄rst, and then

rotate the cyclone system to lift it out.

Fig. F-3

4. Rinse the cyclone assembly, pre-󶀄lter,

and dust cup until they are clean. After

washing, air dry for at least 24 hours.

Fig. F-4

Note:

•

Please clean the dust cup as needed.

•

It is recommended to clean the cyclone

system and pre-filter at least once every

3 to 4 months.

Note:

•

Only use clean water to wash the filter.

Do not use detergent.

•

Do not attempt to clean the filter with a

brush or finger.

•

It is recommended to clean the filter once

every 4 to 6 months.

Похожие устройства