Dreame Trouver J30 Руководство по эксплуатации онлайн [17/32] 882828
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Dreame Trouver J30 Руководство по эксплуатации онлайн [17/32] 882828

Dreame Trouver J30 Руководство по эксплуатации онлайн [17/32] 882828
4
As required, the vacuum body can be
connected with a crevice nozzle, wide
combination tool, illumination multi-
surface brush, and motorized mini-brush
used as a handheld vacuum cleaner.
6. Remove the water tank after use, open
the water tank plug, pour out the
remaining water, and then close the
plug.
5.After startup, the vacuum cleaner starts
cleaning operation of vacuuming
together with mopping.
4.When the water tank comes into
contact with the ground, the water in the
water tank will drip through the water
dispenser hole to wet the mop.
Fig. D1-D6
Prompts
Startup for use
The energy-saving mode is as default for
startup. Press “+”“-”on the display
screen for gear speed regulation. There
are 3 gear speed regulation modes.
During operation, the display screen
shows the current battery level and
current gear level. When the battery level
is lower than 20, please charge in time.
Prompts
Use of different accessories
Used as a handheld vacuum
cleaner
1.Dampen the mop pad and wring out
excess water, then attach it securely to
the bottom of the water tank.
3.Align the water tank with the bottom of
the illumination multi-surface brush, and
then clip it in, ensuring the water tank is
in place.
2.Open the water tank plug, add an
appropriate amount of clean water, then
close the plug.
Water tank assembly
Tilt the vacuum body backward, press
the power switch, and push the vacuum
cleaner forward and backward to make
it start working; press the power switch
again to make it stop working.
While the illumination multi-surface
brush is working, the LED light at the
front end is turned on, facilitating its use
in a dark environment.
Illumination multi-surface brush
It is not allowed to fill corrosive liquid
into the water tank.
The vacuum cleaner is not allowed to
be used in ponding areas; do not
inhale water into the vacuum cleaner,
otherwise the machine will be
damaged.
Open the water inlet soon after use and
pour out the remaining water to avoid
water seepage from damaging the floor
or furniture.
Remove the mop and then dry it after
use to prevent odor and facilitate the
next use.
Prompts
When used for auxiliary dust
vacuuming, the illumination multi-
surface brush constantly rotates at high
speed, so that please do not stay at a
same place for too long, otherwise the
floor surface may be damaged.
There is an over current protection

Похожие устройства

Скачать