Dreame Trouver J30 Руководство по эксплуатации онлайн [18/32] 882828
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Dreame Trouver J30 Руководство по эксплуатации онлайн [18/32] 882828

Dreame Trouver J30 Руководство по эксплуатации онлайн [18/32] 882828
Always use genuine parts to avoid
voiding the warranty.
Before cleaning the dust cup, please
verify that the plug has been
disconnected and the power button of
the vacuum cleaner has been left in the
“OFF” position.
If the vacuum cleaner is not used for a
long time, please fully charge it, unplug
the power cord, take out the battery,
and store it in a cool and low -humidity
environment, avoiding direct sunlight.
To avoid excessive battery discharging,
please charge the battery at least once
every three months.
If the filter is clogged, the vacuum
cleaner will stop functioning shortly
after it is turned on. Please clean up the
filter to restore the function.
Wipe the vacuum cleaner with soft, dry
cloth.
Cleaning the vacuum cleaner
Clean the dust cup, air inlet
filter, and cyclone separator
assembly.
1.Press the dust cup release button, and
remove the cup from the vacuum cleaner.
2.Hold the separator, and rotate it
clockwise to remove it from the vacuum
cleaner.
3.Remove the air inlet filter from the
cyclone separator.
4.Rinse the cyclone assembly, air inlet
filter, and dust cup until they are clean.
It can be used to vacuum the dust from
desktops, keyboards, sofa gaps,
household appliances, and other surfaces.
Wide combination tool
Applicable to cleaning dust at wall
corners, gaps, door and window corners,
and shallow and narrow places.
Crevice nozzle
Used as a tool for cleaning household
carpets, sofa, mattresses, etc., an electric
motor with high-speed rotation can
quickly and effectively remove dust,
bacteria, mites and other dirt from
carpets and furniture surfaces.
Motorized Mini-Brush
Fig. D8-D9
Fig. D10
5
Before installing and replacing
accessories, power off the vacuum
cleaner.
This product cannot keep itself upright
without fixed support. For storage, the
Fig. D11
Fig. D7
function provided at the end of
illumination multi-surface brush. If the
illumination multi-surface brush is
wound or blocked, the preset protection
program will cut off the power supply,
the illumination multi-surface brush will
stop running, and the 3 capacity
indicators will flash all the time. At this
point, please shut down the machine
immediately, remove the battery pack,
check and clean the illumination multi-
surface brush, remove the blockage,
and then load back the battery pack
and start the machine for reuse.
machine and the accessories shall be
stably placed.

Похожие устройства

Скачать