Home
Главная
Dreame Trouver
Пылесосы вертикальные
J30
Руководство по эксплуатации Страница: 19

Dreame Trouver J30 Руководство по эксплуатации онлайн [19/32] 882828

Dreame Trouver J30 Руководство по эксплуатации онлайн [19/32] 882828

1.Toggle the lock knob of the roller brush

in the arrow direction and lift the roller

pressing plate at the same time, and

then take out the roller brush.

2.Cut oﬀ the hair and ﬁber adhering to the

brush roller with scissors, and wipe up

the dust from the groove and transparent

cover with dry cloth or tissue. Wipe it up

completely before use.

3.Rinse the brush roller, if it is dirty, with

Fig.E1-E4

Attention: Please clean the dust cup as

required.

It is recommended to clean the cyclone

system and air inlet ﬁlter at least once

every 3-4 months.

Installation of dust cup, air inlet

ﬁlter, and cyclone separator

assembly

1.Put the inlet ﬁlter back into the cyclone

separator.

Fig.E5-E7

Cleaning air outlet ﬁlter

1.Open the cover plate of air outlet ﬁlter

2.Take out the air outlet ﬁlter

3.Rinse the air outlet ﬁlter with clean

water, and after it is cleaned, dry it by

air for at least 24 hours.

Fig.E8-E10

Cleaning illumination

multi-surface brush

2.Hold the cyclone separator, and rotate

it counterclockwise onto the vacuum

cleaner.

3.Align the dust cup with the slot on the

vacuum cleaner, and rotate it slowly

until the dust cup clicks into place.

1. Use a coin to turn the lock

counterclockwise until you hear click,

then pull out the roller brush.

2. Use scissors to cut and pick out any

hair or other debris tangled around the

roller brush. Wipe the slot and

transparent cover with dry cloth or tissue.

3.When it is dirty, rinse the roller with

clean water until it is clean.

4.Stand the roller upright for at least 24

hours until it is completely dry.

Remove the mop pad from the bottom of

the water tank, and rinse it with water or

using a washing machine. Leave it to air

dry before use.

Fig.E15-E19

Fig.E20-E21

Cleaning water tank (with mop

pad)

Cleaning motorized mini-brush

Fig.E11-E14

6

After cleaning, dry it by air for at least

24 hours.

clean water until it is clean.

4.Stand the brush roller upright for at least

24 hours until it is dry completely.

Похожие устройства