Home
Главная
BaByliss Pro
Машинки Для Стрижки
lo-profx FX825GE
Руководство по эксплуатации Страница: 8

BaByliss Pro lo-profx FX825GE Руководство по эксплуатации онлайн [8/124] 883746

BaByliss Pro lo-profx FX825GE Руководство по эксплуатации онлайн [8/124] 883746

8

power cord around the appliance.

HOW TO USE COMB ATTACH-

MENTS

To use the comb attachments,

turn the clipper to the «0» (OFF)

position. Slide the comb attach-

ment onto the top of the clipper

blade, and then pull down and

over the back of the blade. To

remove, pull up on the back of the

comb attachment and then pull

away from the blade.

Fig. 2

REPLACEMENT (REMOVAL) OF

BLADE SET

Step 1. Unplug the unit and adjust

the taper (see position in illustra-

tion A).

Taper

A.

B.

Small

Moving

Blade

Plastic Oscillator

Step 2. Remove the screws and the

xed blade. Save the screws.

Step 3. Lift o the small moving

blade and replace it with the new

one on the plastic oscillator (see

illustration B).

Step 4. Replace the xed blade

using the screws and lightly tigh-

ten them. Adjust the teeth, as

shown in illustration C, to a gap

of 1 mm to 1.5 mm. The small, mo-

ving blade should be as centered

and as parallel as possible to the

xed blade’s teeth.

IMPORTANT NOTE:

The top edge of the xed blade

must be a minimum of 1 mm

higher than the top edge of the

moving blade and as centered as

possible. This is important so that

the moving blade does not come

in contact with the skin.

Be sure to add a few drops of

BaBylissPRO lubricating oil to the

blades before running the clipper.

Don’t forget to tighten the screws

after the blades have been alig-

ned.

BLADE SHARPENING

BaBylissPRO cutting blades are

ground from the nest quality gra-

phite and are hardened to extend

the cutting performance. As with

any cutting appliance, the cutting

edges become dull from repea-

ted use. Increasing blade tension

to force the blade cutting would

cause the clipper to overheat

and reduce its motor life. When

the blade is no longer able to cut

smoothly, sharpening is required

or replace it with a new BaByliss-

PRO blade set.

C.

Small

Moving

Blade

Fixe Blade

1 to 1.5mm

C.

ADJUSTABLE TAPER LEVER

The taper lever is positioned at

your thumb. You can hold the

Похожие устройства