Neoline Flash 2K Wi-Fi dual Руководство по эксплуатации онлайн [5/20] 884237

GND

ACC(+12V)

+12V

ACC

B+

Connect the BATT (+) power cord to the source providing stable 12V

voltage.

Connect the ACC cord to the power source (ignition circuit).

Connect the GND (-) cord to the car body.

Attention! The color of the wires can be different for each unit. See the

labels on the wires to avoid improper operation of the device.

The Emergency recording is activated automatically when the G-sensor

triggers (sudden acceleration/deceleration), or at a collision. The files

protected from overwriting are stored on the memory card in the

EVENT folder, but can also be overwritten by other emergency files.

CAUTION! Overwritten files cannot be recovered. In the event of an

accident, we recommend stopping the recording and saving the

necessary recordings to your phone or computer.

Troubleshooting

• Cannot take pictures/record video

Check if there is enough free space on the microSD card and if it is not

blocked.

• Spontaneous stop at recording

Too many video files are stored. Only use at least class 10 high-speed

microSD cards by proven manufacturers.

We recommend using 256 GB memory cards prepared for record in 4K,

where the recording speed is at least 40 Mbit/s.

• Blurred image

Check if there is any protective film, dirt or fingerprints on the lens.

Wipe the lens with a soft cloth before use. (it is recommended to use

special care products for the optics in order not to damage the surface

of the lens)