Kuppersberg SLIMLUX 60 B [18/0] Section 3 cleaning and maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kuppersberg SLIMLUX 60 B [18/0] Section 3 cleaning and maintenance

Kuppersberg SLIMLUX 60 W [18/0] Section 3 cleaning and maintenance
18
TECHNICAL PASSPORT ENGLISH
Cooker hood
SECTION 3. CLEANING AND
MAINTENANCE
Caution! Before you start cleaning
the appliance, disconnect it from the
power supply.
Aluminum lter
Aluminum lter is designed to trap
grease particles out of the ow of air
running through it. For this reason,
the lter needs regular cleaning. The
cleaning interval depends on the
frequency of use of the air cleaner.
Generally, it is recommended to clean it
once a month.
To do this, remove the lters, wash
them in water with a neutral liquid
detergent, dry them, then set them back
in the air cleaner. Over time, lters may
change color due to a regular washing.
This is a natural process, which does not
indicate a defect, so lter replacement
is not required. The aluminum lters can
be washed in the dishwasher.
How to remove aluminum lters:
1. Press on the latch of the lter lock.
2. Pulling down a bit, remove the
lter.
In order to put the lters in place
after cleaning, follow the above
instructions in reverse order.
Carbon lter (used in recirculated air
mode)
Carbon lter is designed to trap
odors and fumes while cooking. It is used
in cases where there is no possibility
to connect the air cleaner to a special
ventilation duct for discharging air
outward. When operating the appliance
with a carbon lter, contaminated air is
sucked into the appliance and passes
through a carbon lter, and then clean
air is supplied to the kitchen.
The carbon lter should be replaced
at regular intervals. The interval of lter
replacement depends on the frequency
of use of the air cleaner, style of cooking
and frequency of the aluminum lter
cleaning. Generally, it is recommended
to replace the carbon lter once every
4 months.
How to remove carbon lter:
1. Remove aluminum lters.
2. Turn the carbon lter to the left
and pull it.
3. Replace the old carbon lter with
the new one.
4. Put the lter back into place.
If necessary, clean the outside of the
air cleaner with a soft, damp cloth. Do
not use any abrasive cleaning agents.
For painted stainless steel surfaces: to
avoid scratching it is recommended to
wipe them with a soft, damp cloth in the
painting direction. Do not remove the
lamp cover during the surface cleaning
process.
Caution! Do not use the steam
generators for cleaning.
Caution! Not following the above
rules for cleaning the appliance and
replacing lters may cause re.
Replacing lamps
Before replacing lamps, disconnect
the appliance from the power supply.
Then, with a screwdriver, pry and remove

Содержание

Похожие устройства

Скачать