Assistant AP-700 [30/36] Connecting to pc and transfering data

Y O U R S U C C E S S I S O U R CONCERN!

.р 5

CONNECTING TO PC AND TRANSFERING DATA

MEMORY CARD

Tips to extend battery life:

1. New battery will be its best condition after 2-3 full charging and discharging.

2. Streaming audio or video apps use a lot of battery life.

3. Disable wireless network positioning.

4. Switch off Wi-Fi if you’re not close to a strong Wi-Fi signal for extended periods

of time.

5. Use a quick screen timeout.

6. Reduce brightness to a comfortable level.

7. Widgets that access Web consume more power than widgets that do not.

Note:

Do not use other adaptors to charge the Tablet which can cause damage to

the battery.

When unit is connected to PC via USB cable, the USB-icon appears at the

status

bar. S . elect USB connected, then Turn on USB storage

dialog

appears.

Press OK.

To remove the tablet safely, tap Turn off USB storage.

Transferring contents from computer:

• To import contents into device, connect it to PC via supplied USB cable.

• Upon successful connection to PC, turn to the device, touch and hold the USB

connection icon on status bar, drag downwards to display an ongoing list.

• Select USB connected, then press on Turn on USB storage to enter USB

mode and all operation will be halted.

• Go to [My Computer], double click on the device’s disk to open.

• Perform normal file management operation like other USB device.

Insert the card correctly with the contact pin. Pushing the card in you should hear

a click when the card is seated correctly. You may damage card and the device

if MicroSD card is not inserted correctly. To remove Micro SD card push the card

once again until it clicks.

• When a Micro SD card is inserted in or ejected from the device it may take few

seconds for the device to update the content. Please avoid inserting or ejecting

card when other operation is running as this may cause the system hang.

• Do not remove the card if the content inside the card is being played. This will

halt the operation of the device and cause the device to restart.

• If the system is not responding press the button [Reset].