Kuppersberg ICS 607 черная [42/0] Before you install the hob make sure that

Kuppersberg ICS 627 [42/76] Before you install the hob make sure that
42
TECHNICAL PASSPORT ENGLISH
Hob
Under any circumstances,make
sure the ceramic cooker hob is well
ventilated and the air inlet and outlet
are not blocked.Ensure the ceramic
cooker hob is in good work state. As
shown below
Note: The safety distance
between the hotplate and the cupboard
above the hotplate should be at least
650 mm.
A(мм) B(мм) C(мм) D E
650 50 mini 20 mini
Air
intake
Air exit
5 мм
Before you install the hob,make
sure that:
 The work surface is square
and level, and no structural members
interfere with space requirements.
 The work surface is made of a
heat-resistant material.
 If the hob is installed above an
oven, the oven has a built-in cooling fan.
 The installation will comply
with all clearance requirements and
applicable standards and regulations.
 A suitable isolating switch
providing full disconnection from the
mains power supply is incorporated
in the permanent wiring,mounted and
positioned to comply with the local
wiring rules and regulations.
 The isolating switch must be of
an approved type and provide a 3 mm
air gap contact separation in all poles
(or in all active [phase] conductors
if the local wiring rules allow for this
variation of the requirements).
 The isolating switch will be
easily accessible to the customer with
the hob installed.
 You consult local building
authorities and by-laws if in doubt
regarding installation.
 You use heat-resistant and easy-
to-clean nishes (such as ceramic tiles)
for the wall surfaces surrounding the
hob.

Содержание

Похожие устройства

Скачать