D-Link DMC-1002 [5/21] Configure through web browser

Configure through Web browser

The Media Converter chassis system is accessible using a Web browser (IE

explorer, Netscape Communications, etc.) to open up the chassis monitoring

system. The default IP Address for the chassis system is “192.168.1.1”, and

the default Login name and password is both “root”.

Configuration via Serial Port

The Media Converter chassis system can be accessible using a terminal or

terminal emulator attached to the RS232 serial port on the Switch too.

NOTE: (1) The serial port cable is attached directly with the device.

(2) It needs to upgrade the Terminal Emulator due to key

malfunction.

1. Locate correct DB9 serial port cable with female DB9 connector.

2. Attach the DB9 serial port female cable connector to the male DB9 serial

port connector on the chassis system.

3. Attach the other end of the DB9 serial port cable to a remote

workstation.

4. By default, the Switch uses the following serial port parameter values:

Bits per second 57600

Stop bits 1

Data bits 8

Parity NONE

Flow Control NONE